Glad you asked. Recently spent a couple of nights in the Ruahine tops in utterly foul conditions. Boycotted Rangi hut in favour of finding a sheltered spot over the top somewhere, which we did, piled...
Liked On: 16-06-2023, 12:30 PM
Glad you asked. Recently spent a couple of nights in the Ruahine tops in utterly foul conditions. Boycotted Rangi hut in favour of finding a sheltered spot over the top somewhere, which we did, piled...
Liked On: 22-04-2023, 11:49 PM
Based on my previous experience, my advice is to get hold of bootsngear (previously EZDirect) in Taupo and make an appointment. I tried on around 10 different boots, and after some very good advice...
Liked On: 20-12-2022, 12:11 PM
Glad you asked. Recently spent a couple of nights in the Ruahine tops in utterly foul conditions. Boycotted Rangi hut in favour of finding a sheltered spot over the top somewhere, which we did, piled...
Liked On: 05-11-2022, 04:59 PM
Glad you asked. Recently spent a couple of nights in the Ruahine tops in utterly foul conditions. Boycotted Rangi hut in favour of finding a sheltered spot over the top somewhere, which we did, piled...
Liked On: 04-11-2022, 07:18 PM
I bought an immaculate 6.5x55 Bavarian 4 years ago for $2200 (Rings the only extras). I was interested to see a similiar rifle with a Zeiss scope (from memory) sell for approx $1800 on tm a couple of...
Liked On: 11-09-2022, 03:49 PM
Bit of an update for those that are interested- I took the advice above and gave the corroded area a scrub with a copper brush and some autosol, then a few patches pulled through. Barrel came up...
Liked On: 22-02-2022, 03:02 PM
Bit of an update for those that are interested- I took the advice above and gave the corroded area a scrub with a copper brush and some autosol, then a few patches pulled through. Barrel came up...
Liked On: 22-02-2022, 12:54 PM
Bit of an update for those that are interested- I took the advice above and gave the corroded area a scrub with a copper brush and some autosol, then a few patches pulled through. Barrel came up...
Liked On: 22-02-2022, 12:50 AM
Bit of an update for those that are interested- I took the advice above and gave the corroded area a scrub with a copper brush and some autosol, then a few patches pulled through. Barrel came up...
Liked On: 21-02-2022, 09:17 PM
Hi all, The barrel on my 2E has a 2" section of corrosion 3-4 inches forward of chamber. I can't get the rifle to group at all (tried several different brands of ammo, scope and rings are tight)...
Liked On: 09-01-2022, 05:47 PM