Danny
Member

2316 Likes

Page 41 of 155 First ... 272829303132333435363738394041424344454647484950515253545591141 ... Last

• Jump to page:

1. 
   Danny liked post by GWH On thread : Reinventing the .284 wheel

   Yeah 7mm08 loads i believe mate. He wants to run it as a 7mm08 for now.

   Liked On: 13-11-2020, 02:11 PM

2. 
   Danny liked post by GWH On thread : Reinventing the .284 wheel

   Noswal tell him about your performance and hunting results with 162s from your 22" 708.

   Liked On: 13-11-2020, 08:08 AM

3. 
   Danny liked post by gundoc On thread : Fire cracking, barrel erosion

   Bore scopes are handy if you are actually making barrels. As a gunsmith with more than 50 years experience I have never found the need for one, and regular firearms owners have even less need. The...

   Liked On: 08-11-2020, 03:54 PM

4. 
   Danny liked post by stevodog On thread : Tuatahi work axe

   Watch the chips fly | Stuff.co.nz (http://i.stuff.co.nz/auckland/local-news/rodney-times/3182706/Watch-the-chips-fly) Here's Jason Wynyard. Best Axeman my grandad and his mates have ever seen....

   Liked On: 04-11-2020, 09:22 AM

5. 
   Danny liked post by DBD On thread : R26 and 162grn eld-match 7mm08

   22" with suppressor

   Liked On: 01-11-2020, 04:24 PM

6. 
   Danny liked post by DBD On thread : R26 and 162grn eld-match 7mm08

   72.10mm. Slight flat primers but no craters. I hand loaded them with the mag in as they a bit long. The 43.3gr had pressure issues.

   Liked On: 01-11-2020, 04:07 PM

7. 
   Danny liked post by Hunty1 On thread : R26 and 162grn eld-match 7mm08

   Danny I tried RL17 with the 162 eldm, all loads shot sub MOA. Keen to try 2208 as well due to temp stability.

   Liked On: 31-10-2020, 12:57 PM

8. 
   Danny liked post by gimp On thread : Slow Jigging with Inchiku and Kabura style jigs

   Everything loves a kabura 152425

   Liked On: 29-10-2020, 12:42 PM

9. 
   Danny liked post by kiwijames On thread : Slow Jigging with Inchiku and Kabura style jigs

   My limited testing had more strikes on the inchiku jigs than the kabura but, my brother in-law was keeping up with me using a Shimano Lucanis. One option I would definitely use is adding assist hooks...

   Liked On: 28-10-2020, 08:33 PM

10. 
    Danny liked post by MB On thread : Fishing tomorrow!

    Cracking trip yesterday. Finally got in to some mackerel (favoured eating fish in our house), plus the usual suspects. https://i.ibb.co/SQr2QJP/DCIM-100-GOPRO-GOPR2133-JPG.jpg...

    Liked On: 28-10-2020, 03:32 PM

11. 
    Danny liked post by MB On thread : Slow Jigging with Inchiku and Kabura style jigs

    Summer/actively feeding fish - Slow pitch-style jigs. Winter/lethargic fish - Inchiku worked really slow. Kaburas work too, but they are a hassle on the ski because you can't just clip them...

    Liked On: 28-10-2020, 12:26 PM

12. 
    Danny liked post by southernman On thread : 280rem RL26 loads with heavies?

    I ran quick load with 59.5 R26 and 85mm for a OAL, 60700 Psi, so high, but not foolish high. guessed 24" barrel lenght. Have you tried a lighter bonded bullet, I like the interbond 154 gr and...

    Liked On: 21-10-2020, 08:50 PM

13. 
    Danny liked post by PillowDribbler On thread : Killwell 9089

    Sorted thanks Danny,got a Okuma Airframe for $30 from Taupo.

    Liked On: 20-10-2020, 06:59 AM

14. 
    Danny liked post by grandpamac On thread : Long range Hawkes Bay

    Greetings All, Went out to the 1,000 yard shoot on that range with my son a couple of weeks back. Shooting is all prone and there are three classes. My son shoots FTR using a .308, bipod and rear...

    Liked On: 14-10-2020, 06:30 PM

15. 
    Danny liked post by MSL On thread : Down jacket. Stoney creek vs Hunters element

    WOE make the cactus puffer jacket Sent from my iPhone using Tapatalk

    Liked On: 14-10-2020, 12:35 PM

Page 41 of 155 First ... 272829303132333435363738394041424344454647484950515253545591141 ... Last

• Jump to page: