dannyb
Unapologetic gun slut

13927 Likes

Page 143 of 929 First ... 4393129130131132133134135136137138139140141142143144145146147148149150151152153154155156157193243643 ... Last

• Jump to page:

1. 
   dannyb liked post by Sika 8 On thread : Jacket zipper repairs

   Twin needle do zip repairs, bread and butter stuff for them.

   Liked On: 04-09-2023, 02:43 PM

2. 
   dannyb liked post by gundoc On thread : Most common suppressor thread pitch

   Both are readily available here but 1/2"x28 is more common.

   Liked On: 04-09-2023, 02:15 PM

3. 
   dannyb liked post by akaroa1 On thread : Primer Shortage...to be continued???

   My back of a scrap of paper calculation is Bullet dwell time to get up to speed and exit a 600mm long barrel 0.002 Seconds Barrel that lasts 1500 rounds x dwell time @ 0.002 seconds and your...

   Liked On: 04-09-2023, 09:40 AM

4. 
   dannyb liked post by 6.5 CRD On thread : 6.5 staball vs 2209

   6.5 Staball will give more speed but at the sacrifice of temp sensitivity. If you have a good load sorted already with 2209, i would stick with that. If you look hard enough, you will find some. Bit...

   Liked On: 03-09-2023, 09:10 PM

5. 
   dannyb liked post by Rock river arms hunter On thread : Gunworks re barreling experience

   Couldn't agree more. The team there are brilliant. The late Robbie would be very proud of his business

   Liked On: 03-09-2023, 08:52 AM

6. 
   dannyb liked post by No.3 On thread : Gunworks re barreling experience

   Gunworks are in short, bloody brilliant. Even when you find a problem, it isn't really a problem for some reason!

   Liked On: 03-09-2023, 08:52 AM

7. 
   dannyb liked post by Rock river arms hunter On thread : Gunworks re barreling experience

   Hi folks. So often you hear of bad experiences, however I thought I'd share my experience of late with Gunworks. As many will know I've had to re barrel my 284. Gunworks had a Shillen select...

   Liked On: 03-09-2023, 08:52 AM

8. 
   dannyb liked post by Beetroot On thread : 6.5 staball vs 2209

   StaBall should be faser but being a ball power you will likely find you are able to fit more powder into the case than 2209, so you'll get higher velocities but be burning more powder (not a crazy...

   Liked On: 02-09-2023, 11:26 PM

9. 
   dannyb liked post by 7mm Rem Mag On thread : Primer Shortage...to be continued???

   Theres no doubt about it once you have the gear you may as well reload especially once you have a good load sorted. There is something satisfying knowing you shot something with your own reloads.

   Liked On: 01-09-2023, 07:53 PM

10. 
    dannyb liked post by Happy Jack On thread : Change of Address requirements

    Since when did ammo storage need fixing to the wall? Mine is but the inspector who came 2 weeks ago as I moved into this place early June said it didn't have to be fixed and I believe the law doesn't...

    Liked On: 01-09-2023, 07:51 PM

11. 
    dannyb liked post by 7mm Rem Mag On thread : Primer Shortage...to be continued???

    Thats all good if the factory stuff shoots well in your riffle or you can find heavy projectiles in factory loads. Most people that reload either want super accurate ammo or do so because they...

    Liked On: 01-09-2023, 04:43 PM

12. 
    dannyb liked post by Happy Jack On thread : The FSA are chasing down the firearms of the deceased

    I hold firearms for my step son who let his licence lapse for personal reasons, this was nearly 2 years ago, he had to give details of who has his firearms and I then got a call from the then arms...

    Liked On: 31-08-2023, 09:00 PM

13. 
    dannyb liked post by Dicko On thread : Primer Shortage...to be continued???

    Sorry per 1000 Sent from my iPhone using Tapatalk

    Liked On: 31-08-2023, 04:39 PM

14. 
    dannyb liked post by Ryan_Songhurst On thread : Macauley River Access

    Main crossing at Lillybank will be walk in the park for that thing, Dad been crossing back and forth in 4wd Mitsi Canter towing a big 5th wheeler for work lately

    Liked On: 30-08-2023, 12:02 PM

15. 
    dannyb liked post by StrikerNZ On thread : JARD .17 WSM Reliability Issues

    Sounds like about time to insist on a refund. Clearly some form of fault in the rifle, not really reasonable to expect you to put up with the misfires and replacing firing pins every 3 months.

    Liked On: 29-08-2023, 03:08 PM

Page 143 of 929 First ... 4393129130131132133134135136137138139140141142143144145146147148149150151152153154155156157193243643 ... Last

• Jump to page: