Ive got a 30cal soppressor with 14x1 I get every barrel threaded for that then the one suppressor fits all my rifles
Liked On: 21-08-2023, 04:24 PM
1980's style for dinner, only didn't have a cherry for the top.... Ham steak, caramelized pineapple chunks (didn't have slices)with Chilli, mushroom gravy and mashed spud made with cream and a...
Liked On: 21-08-2023, 03:44 PM
Where is the middle finger emoji? Something simple, so you can understand.
Liked On: 21-08-2023, 03:31 PM
I wouldn't bother using 4H lock for normal gravel road driving, just slippery places where there is a chance of getting stuck. You can slightly apply the handbrake when you're stuck and it works a...
Liked On: 21-08-2023, 02:39 PM
What is actually happening in this scenario, is one wheel on one end of the diff has good traction and it's opposite number doesn't so spins happily while it's mate that still has some bite, bites...
Liked On: 21-08-2023, 02:39 PM
Careful, by his own admission, Ross ain't much chop with the welder, but he's a f*cking artist with a grinder :D:D:D
Liked On: 21-08-2023, 01:10 PM
Get a little tiny sharp screwdriver and tap one side of the stubb to turn it out. Put a drop of penetrating oil or acetone ( nail polish remover) on it and leave it a few minutes before trying.
Liked On: 21-08-2023, 12:54 PM
A couple of those traction boards are a good investment for the soft stuff. Just make sure you wash the absolute shit out of the truck, especially underneath or you'll be dealing with rust in no...
Liked On: 21-08-2023, 12:52 PM
you have no less traction/wheels spinning than landrovers or early hiluxs cruisers etc SOME have a slippery arse end diff so it spins one side and slowly turns the other..much better but not all...
Liked On: 21-08-2023, 11:14 AM
Sounds like everything was ooerating correctly. To have all 4 wheels going at once you need to have diff locks or a limited slip diff. I have the same Zuk but a bit older. Lots of utes will have a...
Liked On: 21-08-2023, 11:14 AM
Very capable off road man did our one take us on some adventures. Your getting one wheel spinning per axle as it doesnt have a lsd in it
Liked On: 21-08-2023, 11:13 AM
Decide on barrel length by what you do, not by what others do. For shots sometimes over 200 yds using heavy bullets 20-22 inches is good for me. If lead in the air with bulk 55 grn shooting...
Liked On: 20-08-2023, 08:56 PM
Fairly easy to mod the original Magneto to work with suppressors. I've had zero issues with mine in modded format. I still remove it to shoot for groups only because the poi is slighly changed...
Liked On: 20-08-2023, 07:15 PM
I run a Spartan bipod, recently bought the Davros head that attaches to a tripod, with a walking pole to stabilise the stock, I have everything from prone to sitting to almost a full standing height...
Liked On: 19-08-2023, 09:22 PM
Thats the 12" mate i imagen the 8" would be around 11" to under side of fore end . The 8" has less range of movements though im not sure it does the splits some reading would be recommended
Liked On: 19-08-2023, 02:27 PM