Just looked at those appear to be no small size which is what I need as a 6-10 size never fits a size 7 foot from any maker
Liked On: 16-03-2024, 10:17 PM
Picture probably explain it better. NRF
Liked On: 31-01-2024, 06:16 PM
I think there is a bag of recoil pads lying around here somewhere..... PM me if interested....and I will have a look. Stock looks very nice...I love the grain and colour....very well done.
Liked On: 13-01-2024, 06:28 PM
You can borrow my checkering tools free if you want them.
Liked On: 13-01-2024, 06:27 PM
A topic that's probably been done to death, but here are a few observations that I've made that might be useful to people who are considering taking their kids out for a shot. #1 I've learnt that...
Liked On: 03-12-2023, 01:35 PM
The Surf has a claimed fuel consumption of 11.4 L/100km, which isn't the worst for a bigger petrol vehicle (approx. 2T), The motors are good but online claims of them being less suited to the bigger...
Liked On: 02-12-2023, 12:03 PM
Another good tip for you Delphus is to inlet the bottom metal before you shape the outline of the stock. If it’s one piece bottom metal, that should be the very first thing that gets inletted, then...
Liked On: 09-11-2023, 07:37 AM
Cheers for the input everyone. Really appreciate everybody giving their 2 cents to a newbie, this forum is really valuable for someone just getting into the thick of things. Have been looking for...
Liked On: 30-10-2023, 07:33 PM
I met Fitzy on a long range shooting course. I was impressed by his commitment to bringing quality outdoor gear to NZ. His background is military and he's also a hunter so he knows what works and...
Liked On: 28-10-2023, 09:27 AM
A rear locker or limited slip diff running Redline Heavy duty Shockproof gear oil (isuzus) will lock up rear end and significantly improve traction. Huge improvement - had this on all my club trucks,...
Liked On: 21-08-2023, 07:55 PM
Delphus I remember reading in the AA magazine back in the 1980's about a LTD Ford that had been taken in for a WOF. The "inspector" tested the handbrake by engaging it, selecting "D" and stomping on...
Liked On: 11-08-2023, 12:01 PM
Truoil will be all good, I HIGHLY recommend thinning with lacquer thinner for the sealing coats. Help it get in deep. And de-whisker very well, or first time you take it out in the rain it will...
Liked On: 21-06-2023, 10:07 AM
Mistake # two - clamping stock in steel vice??
Liked On: 20-06-2023, 08:31 PM
I use these on the cold clear days mate - https://pilotshop.co.nz/products/nomex-aviator-gloves-green-1?_pos=3&_sid=2ed978f2a&_ss=r Perhaps a bit of a nostalgic hangover from the army days but the...
Liked On: 16-06-2023, 01:02 PM
Check the “door” or gate that allows hot air to enter that side The stainless pin will be sliding inside the door and not moving it Or the clip has fallen off the actuating cable Keep...
Liked On: 04-06-2023, 02:49 PM