eamars
Member

67 Likes

Page 1 of 5 12345 Last

• Jump to page:

1. 
   eamars liked post by Preacher On thread : Best solution to clean the fully sealed suppressor?

   Do it twice? 3000 rounds is a fair amount of shit built up

   Liked On: 08-04-2024, 05:44 PM

2. 
   eamars liked post by Bol Tackshin On thread : Best solution to clean the fully sealed suppressor?

   As Tiaan suggested. I had a sealed suppressor on an old 303 that suffered from this. Just pour a few tablespoons in (I used Hoppes no 9), plug both ends, leave it in a handy spot for a day and give...

   Liked On: 08-04-2024, 03:22 PM

3. 
   eamars liked post by TianBotha On thread : Best solution to clean the fully sealed suppressor?

   If you have access to copious amounts of bore solvent, I’ve plugged my suppressor before and filled it up for a few hours and given it a good rinse out after. Worked well Sent from my iPhone...

   Liked On: 08-04-2024, 03:22 PM

4. 
   eamars liked post by grandpamac On thread : "Trueing" BC/Velocity

   Greetings eamars and all, That is exactly what I have done and found measured velocity at the target was very close to estimated, less than 10 fps. I did not measure the drop as I had done a rough...

   Liked On: 05-04-2024, 03:59 PM

5. 
   eamars liked post by Cyclops On thread : Long Range Hunting and F-Class Target Shooting.

   A list of NRANZ affiliated clubs can be found on the NRANZ website https://www.nranz.org.nz/associations-and-clubs/member-clubs/ It will be prone shooting (or benchrest) on most NRANZ certified...

   Liked On: 26-02-2024, 08:45 PM

6. 
   eamars liked post by PadLo On thread : Home Made AutoTrickler (OpenTrickler) Project

   Very cool, nice work.

   Liked On: 12-10-2021, 09:04 PM

7. 
   eamars liked post by johnd On thread : Home Made AutoTrickler (OpenTrickler) Project

   Well done!

   Liked On: 12-10-2021, 09:04 PM

8. 
   eamars liked post by 7mm Rem Mag On thread : Home Made AutoTrickler (OpenTrickler) Project

   Looks good

   Liked On: 12-10-2021, 09:04 PM

9. 
   eamars liked post by Jhon On thread : RCBS Summit - anyone with experience of using one?

   Here ya go. Some disclaimers first: I'm a practical reloader for average distance hunting. And pistol shooting. I don't have any expertise in the real fancy stuff like shoulder bumping, chasing the...

   Liked On: 10-10-2021, 02:54 PM

10. 
    eamars liked post by zimmer On thread : RCBS Summit - anyone with experience of using one?

    Good choice. I think you'll find the Co-ax will take over more than just sizing.

    Liked On: 07-10-2021, 02:37 PM

11. 
    eamars liked post by biggles301 On thread : Quick release suppressor.

    The ratchet lock also removes the possibility of having it unthread itself during use which is nice if you intend taking multiple shots in a hurry. Big fan of my Oceania!

    Liked On: 05-08-2021, 11:31 PM

12. 
    eamars liked post by 308mate On thread : Quick release suppressor.

    Agree with eamars My ODL works great on my 30-30 Marlin Dark. Sees service on my 300blk Howa too with a separate muzzle device. 174355 174356

    Liked On: 05-08-2021, 11:31 PM

13. 
    eamars liked post by BMcB On thread : Comparing rangefinding binos.

    I'm finding myself with an urge to spend some money on rangefinding binos for use in elr and prs matches as well as hunting. Does anyone have direct experience comparing the Sig Kilo 3000 with the...

    Liked On: 02-08-2021, 03:38 PM

14. 
    eamars liked post by Marty Henry On thread : Collapsed straight wall cases

    A Photo would help with diagnosis and or give us a bit of amusement. Here's one of my better efforts as an example

    Liked On: 20-07-2021, 03:47 PM

15. 
    eamars liked post by Ultimitsu On thread : A comparison of HD vs non HD high end scopes

    "HD" glass means High Density glass. Wikipedia says this: "The density of soda glass is 2.4 g/cm3 (39 g/cu in) or below, while typical lead crystal has a density of around 3.1 g/cm3 (51 g/in3) and...

    Liked On: 16-07-2021, 03:24 PM

Page 1 of 5 12345 Last

• Jump to page: