Friwi
Member

2642 Likes

Page 30 of 177 First ... 161718192021222324252627282930313233343536373839404142434480130 ... Last

• Jump to page:

1. 
   erniec liked post by Friwi On thread : Rem 700 magazine well

   No, that is probably because the spacer has not been put on from the top . There are two tabs on the top which stop it from falling down. But sometime you can still hear the spacer rattling

   Liked On: 10-02-2024, 09:36 PM

2. 
   Shearer liked post by Friwi On thread : Tropical fishing. Looking for suggestions.

   Australia coast would be full of crocs? Nah?

   Liked On: 09-02-2024, 07:22 AM

3. 
   -BW- liked post by Friwi On thread : 9.3x62 loading

   Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

   Liked On: 08-02-2024, 03:43 PM

4. 
   Dazzh liked post by Friwi On thread : A gunsmith question - head spacing.

   Other solution, is fitting a custom recoil lug , slightly thicker. The benefit is that a bit of truing work can be done on the action face, bolt face and lug abutment/ contact if required . Final ...

   Liked On: 08-02-2024, 10:11 AM

5. 
   6x47 liked post by Friwi On thread : A gunsmith question - head spacing.

   Other solution, is fitting a custom recoil lug , slightly thicker. The benefit is that a bit of truing work can be done on the action face, bolt face and lug abutment/ contact if required . Final ...

   Liked On: 07-02-2024, 09:19 PM

6. 
   chainsaw liked post by Friwi On thread : A gunsmith question - head spacing.

   Other solution, is fitting a custom recoil lug , slightly thicker. The benefit is that a bit of truing work can be done on the action face, bolt face and lug abutment/ contact if required . Final ...

   Liked On: 07-02-2024, 08:53 PM

7. 
   Maca49 liked post by Friwi On thread : A gunsmith question - head spacing.

   Other solution, is fitting a custom recoil lug , slightly thicker. The benefit is that a bit of truing work can be done on the action face, bolt face and lug abutment/ contact if required . Final ...

   Liked On: 07-02-2024, 08:48 PM

8. 
   Lucky liked post by Friwi On thread : 9.3x62 loading

   Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

   Liked On: 05-02-2024, 09:09 AM

9. 
   55six liked post by Friwi On thread : Strasser Straight pull rifles ?

   The importer of them in nz is a really nice guy, and make the effort of being at every sika show. It is more a side business/ hobby for him. If they were bad rifles, they would not be produced...

   Liked On: 04-02-2024, 09:42 PM

10. 
    Tahr liked post by Friwi On thread : Best rings for Tikka setup

    Another one which is not advertised is a set of leupold ones. Same as talleys in principle but way superior in fit and finish. https://www.midwayusa.com/product/1019633534?pid=732668 Nz Asia...

    Liked On: 03-02-2024, 11:07 PM

11. 
    SPEARONZ liked post by Friwi On thread : Best rings for Tikka setup

    Another one which is not advertised is a set of leupold ones. Same as talleys in principle but way superior in fit and finish. https://www.midwayusa.com/product/1019633534?pid=732668 Nz Asia...

    Liked On: 03-02-2024, 04:42 PM

12. 
    JohnDuxbury liked post by Friwi On thread : 9.3x62 loading

    Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

    Liked On: 03-02-2024, 02:41 AM

13. 
    Micky Duck liked post by Friwi On thread : 9.3x62 loading

    Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

    Liked On: 01-02-2024, 09:40 PM

14. 
    RV1 liked post by Friwi On thread : Knife sharpning - Leather Strops

    You could use your grinding paste with balistol, it is meant to maintain leather souple and stop it cracking. You can make your home grinding paste by burning bits of sand paper of the grit you want...

    Liked On: 29-01-2024, 01:09 PM

15. 
    makka liked post by Friwi On thread : Helping farmers out

    https://wurstcircle.com/recipes/goose-rillette/ Here is a good recipe for these geese

    Liked On: 26-01-2024, 09:55 PM

Page 30 of 177 First ... 161718192021222324252627282930313233343536373839404142434480130 ... Last

• Jump to page: