Fssprecision
Member

746 Likes

Page 42 of 50 First ... 2829303132333435363738394041424344454647484950 Last

• Jump to page:

1. 
   Joe_90 liked post by Fssprecision On thread : Owl optics 410 suppressed shotgun

   I guess first I should say that I am Mr FSS, I designed and manufacture them, so to confirm a few details. There are two models, the original fully suppressed one which has to be heard to be...

   Liked On: 18-04-2022, 09:43 PM

2. 
   Brian liked post by Fssprecision On thread : Owl optics 410 suppressed shotgun

   I guess first I should say that I am Mr FSS, I designed and manufacture them, so to confirm a few details. There are two models, the original fully suppressed one which has to be heard to be...

   Liked On: 18-04-2022, 09:17 PM

3. 
   Moa Hunter liked post by Fssprecision On thread : Suppressed 9mm

   I made up a short rail and screwed it to the shotgun barrel, quite safe, don't forget that the 32 acp section was a liner that slid in. Really quite safe in most applications as long as you use...

   Liked On: 17-04-2022, 06:07 PM

4. 
   Moa Hunter liked post by Fssprecision On thread : Suppressed 9mm

   I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

   Liked On: 17-04-2022, 06:06 PM

5. 
   Moa Hunter liked post by Fssprecision On thread : Suppressed 9mm

   Here is another project that I have been working on, I took a new 410 and re-barreled it with a length of 9mm barrel, then fitted a full length can including K baffles in the end section. The idea...

   Liked On: 17-04-2022, 05:19 PM

6. 
   Fatberg liked post by Fssprecision On thread : Suppressed 9mm

   I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

   Liked On: 17-04-2022, 04:54 PM

7. 
   Cordite liked post by Fssprecision On thread : Suppressed 9mm

   I made up a short rail and screwed it to the shotgun barrel, quite safe, don't forget that the 32 acp section was a liner that slid in. Really quite safe in most applications as long as you use...

   Liked On: 16-04-2022, 05:19 PM

8. 
   Cordite liked post by Fssprecision On thread : Suppressed 9mm

   To be honest I've no idea, with stuff like this you just have to try it to find out......would need a bit of research on comparable velocities and diameters to give some idea but like with the above...

   Liked On: 16-04-2022, 10:51 AM

9. 
   Cordite liked post by Fssprecision On thread : Suppressed 9mm

   I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

   Liked On: 16-04-2022, 10:50 AM

10. 
    Micky Duck liked post by Fssprecision On thread : Suppressed 9mm

    To be honest I've no idea, with stuff like this you just have to try it to find out......would need a bit of research on comparable velocities and diameters to give some idea but like with the above...

    Liked On: 16-04-2022, 10:38 AM

11. 
    40mm liked post by Fssprecision On thread : Suppressed 9mm

    I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

    Liked On: 16-04-2022, 07:36 AM

12. 
    40mm liked post by Fssprecision On thread : Suppressed 9mm

    Here is another project that I have been working on, I took a new 410 and re-barreled it with a length of 9mm barrel, then fitted a full length can including K baffles in the end section. The idea...

    Liked On: 16-04-2022, 07:31 AM

13. 
    300CALMAN liked post by Fssprecision On thread : Suppressed 9mm

    I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

    Liked On: 15-04-2022, 09:37 PM

14. 
    Micky Duck liked post by Fssprecision On thread : Suppressed 9mm

    I just remembered I made this a few years back, a bit of old 303 barrel that acted as a liner in a shotgun, on top of that I built the suppressor, extractor and chambered it for 32 ACP. A guy...

    Liked On: 15-04-2022, 08:17 PM

15. 
    veitnamcam liked post by Fssprecision On thread : Suppressed 9mm

    Here is another project that I have been working on, I took a new 410 and re-barreled it with a length of 9mm barrel, then fitted a full length can including K baffles in the end section. The idea...

    Liked On: 15-04-2022, 08:08 AM

Page 42 of 50 First ... 2829303132333435363738394041424344454647484950 Last

• Jump to page: