Hi 300calman get in touch with FSS . He has led me down this path What cal would you like to try i guess the Monty will handle the 410 //22lr and 22 mag chamber pressures so stay with...
Liked On: 14-05-2023, 10:57 AM
223763 With the help of a Mate [FSS ] we gave birth to this 9 mm blank pushing a 22 H&N 30 grain slug via a Crossman air gun barrel The action is a little Rossi 410 block . To fire open...
Liked On: 13-05-2023, 06:48 PM
Just in case you didn`t get what you were after: Collector C1 General, C2 Heirloom, C3 Museum, C4 Theatrical , P6 Prohibited firearms, P7 Prohibited magazines, P8 Theatrical Prohibited...
Liked On: 19-04-2023, 11:35 AM
In the hayday of Blackpowder shooting the big shoot at Wanganui used to open with a canon shoot, maybe 10 of them. All scaled versions but still quite terrifying. They used to register a good solid...
Liked On: 15-04-2023, 06:55 AM
In the world of precision engineering firearms are actually not all that precise, a tolerance of .002-.003" being fairly normal. That is smaller than a gnat's cock to builder but positively sloppy to...
Liked On: 07-04-2023, 02:54 PM
I would have said closer to $300 and emery cloth /fine sand paper on a dowel is a more subtle way to achieve it....
Liked On: 02-04-2023, 04:33 AM
Also worth noting the rifle may not be legal as its magazine is specified at 11 rounds capacity. If so you will need to get the tube modified by a gunsmith (another couple of hundred bucks).
Liked On: 19-03-2023, 04:34 PM
James Puckle invented the idea back in the 1600s round shot to be used for christians, square shot against infidels, and his gun had chambers to suit both but only a cylindrical barrel. How he came...
Liked On: 10-03-2023, 04:09 AM
Yep I get that. solid consistent contact or no contact at all should work. But partial or variable contact would most likely cause accuracy issues.
Liked On: 27-02-2023, 09:42 PM
12 hours a day 7 days a week on a chain gang for a few years
Liked On: 24-02-2023, 01:03 PM
Rossi octagonal rifles hold 12 in .357, maybe other variations- I've made a few extended followers for them. There's lots of tube mag rifles lying around that don't comply. Quite a few listed on TM...
Liked On: 19-02-2023, 10:46 AM
yes I believe you have that correct..with proviso that that is for the largest round firearm is chambered for....
Liked On: 19-02-2023, 06:13 AM
You should make a thread just about some of your crazyest stories would be hella entertaining
Liked On: 16-02-2023, 08:20 AM
Hey thanks all. Good to hear. I’m glad to hear I wouldn’t be shortchanged by going with a standard (non-Rimfire specific) scope. It opens up many options. I was mainly looking at 2-7x30ish...
Liked On: 11-02-2023, 04:43 AM
I had to print a stock extension to get a 10/22 to legal length, it needed a touch over 30mm 216468 216469
Liked On: 10-02-2023, 08:23 AM