Hi all, I`m heading into the Okahu rd area, haven't been in there for yonks, the plan is to drive in with my small caravan and park in the camp site, then hunt up the sides and of the Skips track....
Liked On: 06-10-2016, 10:15 PM
So there you go Lockie, there`s goats out there, just have to look up trees, make sure you get a 105 howitzer or 25 lder and catch them smoking 1080, :huh:. yep, they are all mad on here, have to...
Liked On: 03-10-2016, 08:30 PM
So there you go Lockie, there`s goats out there, just have to look up trees, make sure you get a 105 howitzer or 25 lder and catch them smoking 1080, :huh:. yep, they are all mad on here, have to...
Liked On: 03-10-2016, 02:01 PM
Hi, we are all in the same boat, so looking for hunting spots I`m looking at " D O C Discover the out doors", it`s a map of all the nz open hunting areas. Just have to use the mark 1 eye all and...
Liked On: 29-09-2016, 11:06 PM
Hi, we are all in the same boat, so looking for hunting spots I`m looking at " D O C Discover the out doors", it`s a map of all the nz open hunting areas. Just have to use the mark 1 eye all and...
Liked On: 29-09-2016, 02:39 PM
So with a bit of a break in the weather I set up and had a casting session, some for my 3030, .308, (No I bought that mould), and the big stuff for the Sharps. The mould was good to cast with and...
Liked On: 05-08-2016, 08:08 AM
I thought it was Gadgetman who had the new old lathe, give him something to do. Now Maca49, don`t rush me, all will be revealed. First off is the stuff ups, :XD:, yes I do make them, the d bit left...
Liked On: 05-08-2016, 08:07 AM
When the first hole is drilled and finished the blocks are reset up for the second one and all repeated again, It is best to go in a few times with the D bit to take out the spring in the tool...
Liked On: 05-08-2016, 08:05 AM
Yep, And that's the fun of this game, looking around the U S forums every body is different and there way works the best. One guy was talking about his 800yrds paper patched loads with black powder ,...
Liked On: 04-08-2016, 11:40 PM
I thought it was Gadgetman who had the new old lathe, give him something to do. Now Maca49, don`t rush me, all will be revealed. First off is the stuff ups, :XD:, yes I do make them, the d bit left...
Liked On: 04-08-2016, 11:39 PM
So with a bit of a break in the weather I set up and had a casting session, some for my 3030, .308, (No I bought that mould), and the big stuff for the Sharps. The mould was good to cast with and...
Liked On: 30-07-2016, 09:26 PM
Hi Guys, just saw this thread, where is this shoot going to be in h/bay, address?, I have small caravan so can come self contained if I can find out there it is. Will bring along my beasties for a...
Liked On: 29-07-2016, 01:56 PM
So with a bit of a break in the weather I set up and had a casting session, some for my 3030, .308, (No I bought that mould), and the big stuff for the Sharps. The mould was good to cast with and...
Liked On: 28-07-2016, 10:02 PM
When the first hole is drilled and finished the blocks are reset up for the second one and all repeated again, It is best to go in a few times with the D bit to take out the spring in the tool...
Liked On: 26-07-2016, 09:44 PM
I just put in three pins, :huh: , more the merrier, but it works, and no boring bar, I made up a "D" bit from sliver steel the shape of the bullet. I`m using handles and spruce cutter for another...
Liked On: 25-07-2016, 10:59 PM