homebrew.357
Member

1244 Likes

Page 51 of 83 First ... 3738394041424344454647484950515253545556575859606162636465 ... Last

• Jump to page:

1. 
   Fireflite liked post by homebrew.357 On thread : Makeing a double paper patch mould

   I just put in three pins, :huh: , more the merrier, but it works, and no boring bar, I made up a "D" bit from sliver steel the shape of the bullet. I`m using handles and spruce cutter for another...

   Liked On: 25-07-2016, 10:50 PM

2. 
   gadgetman liked post by homebrew.357 On thread : Makeing a double paper patch mould

   I just put in three pins, :huh: , more the merrier, but it works, and no boring bar, I made up a "D" bit from sliver steel the shape of the bullet. I`m using handles and spruce cutter for another...

   Liked On: 25-07-2016, 09:21 PM

3. 
   gadgetman liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...

   Liked On: 25-07-2016, 09:20 PM

4. 
   Beaker liked post by homebrew.357 On thread : Makeing a double paper patch mould

   I just put in three pins, :huh: , more the merrier, but it works, and no boring bar, I made up a "D" bit from sliver steel the shape of the bullet. I`m using handles and spruce cutter for another...

   Liked On: 25-07-2016, 08:51 PM

5. 
   veitnamcam liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Hi All, The Sharps cartridge originally came out with a paper patched bullet, Sooooo, using my poor long suffering lathe to have a go at making one. Using ali I cut out two blocks for a double mould,...

   Liked On: 25-07-2016, 08:01 AM

6. 
   Maca49 liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...

   Liked On: 24-07-2016, 10:45 PM

7. 
   Beaker liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...

   Liked On: 24-07-2016, 10:38 PM

8. 
   Beaker liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Hi All, The Sharps cartridge originally came out with a paper patched bullet, Sooooo, using my poor long suffering lathe to have a go at making one. Using ali I cut out two blocks for a double mould,...

   Liked On: 24-07-2016, 10:37 PM

9. 
   Fireflite liked post by homebrew.357 On thread : Makeing a double paper patch mould

   Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...

   Liked On: 24-07-2016, 10:18 PM

10. 
    Tommy liked post by homebrew.357 On thread : Makeing a double paper patch mould

    Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...

    Liked On: 24-07-2016, 09:09 PM

11. 
    kimjon liked post by homebrew.357 On thread : Makeing a double paper patch mould

    Hi All, The Sharps cartridge originally came out with a paper patched bullet, Sooooo, using my poor long suffering lathe to have a go at making one. Using ali I cut out two blocks for a double mould,...

    Liked On: 23-07-2016, 08:16 PM

12. 
    gadgetman liked post by homebrew.357 On thread : Makeing a double paper patch mould

    Hi All, The Sharps cartridge originally came out with a paper patched bullet, Sooooo, using my poor long suffering lathe to have a go at making one. Using ali I cut out two blocks for a double mould,...

    Liked On: 23-07-2016, 05:37 PM

13. 
    Mathias liked post by homebrew.357 On thread : Makeing a double paper patch mould

    Hi All, The Sharps cartridge originally came out with a paper patched bullet, Sooooo, using my poor long suffering lathe to have a go at making one. Using ali I cut out two blocks for a double mould,...

    Liked On: 23-07-2016, 12:47 PM

14. 
    veitnamcam liked post by homebrew.357 On thread : Payment for the Toby Goodley Memorial Shoot

    Hi Guys, just saw this thread, where is this shoot going to be in h/bay, address?, I have small caravan so can come self contained if I can find out there it is. Will bring along my beasties for a...

    Liked On: 22-07-2016, 11:59 PM

15. 
    199p liked post by homebrew.357 On thread : Payment for the Toby Goodley Memorial Shoot

    Hi Guys, just saw this thread, where is this shoot going to be in h/bay, address?, I have small caravan so can come self contained if I can find out there it is. Will bring along my beasties for a...

    Liked On: 22-07-2016, 10:48 PM

Page 51 of 83 First ... 3738394041424344454647484950515253545556575859606162636465 ... Last

• Jump to page: