jakewire
Caretaker - Gone But Not Forgotten

3274 Likes

Page 8 of 219 First 1234567891011121314151617181920212258108 ... Last

• Jump to page:

1. 
   jakewire liked post by Shearer On thread : seeking advice on a suitable caliber and make/model

   Haha. You might be surprised.

   Liked On: 20-10-2022, 06:36 PM

2. 
   jakewire liked post by southernman On thread : 9.3x62 loads

   Just cause this thread need pictures. 208185208186 couple of the 9.3x74 double rifle. Sako Bavarian 20" 208187

   Liked On: 19-10-2022, 05:44 PM

3. 
   jakewire liked post by southernman On thread : 9.3x62 loads

   It's been 7 years since i comment on this thread, I've added a Sako 9.3x62 and a fair double rifle in 9.3x74, loads have changed, still use 60gr varget in the Husky, the Sako Bairvian 20" gets ...

   Liked On: 19-10-2022, 05:44 PM

4. 
   jakewire liked post by MB On thread : Lure fishing over sand

   90% of my fishing is over sand in 35 - 50 metres. My go to is a standard softbait outfit. The one I use is on the light side, 3-6kg rod with a 2500 reel, 15lb braid. The beauty of fishing over sand...

   Liked On: 18-10-2022, 07:16 PM

5. 
   jakewire liked post by kiwijames On thread : Sako Brass

   There's Petersen brass at Workshop Innovation as another option. http://https://reloadingdirect.co.nz/shop/reloading-stuff/brass/peterson-brass-cases/

   Liked On: 17-10-2022, 05:46 PM

6. 
   jakewire liked post by caberslash On thread : Sako Brass

   Get Sako ammo for work, give all the brass away, don't like it personally. Too brittle, thin walls. Prefer RWS, Norma, Lapua etc.

   Liked On: 17-10-2022, 05:46 PM

7. 
   jakewire liked post by mikee On thread : Sako Brass

   I have been using 308 SAKO brass. good stuff so far. Not as soft as Norma

   Liked On: 17-10-2022, 05:46 PM

8. 
   jakewire liked post by 7mmsaum On thread : Sako Brass

   No problem with Sako component brass Have annealed it on the 5th firing in rem mag and another batch annealed every firing Two minor neck cracks out of 100x brass (when not annealing every...

   Liked On: 17-10-2022, 05:46 PM

9. 
   jakewire liked post by BRADS On thread : Goodbye Toby we will remember you

   7 years were did they go mate ? 6 years ago when the forum was a bit different we raised over $13,000 for Ozanam House in your memory bro....

   Liked On: 17-10-2022, 05:43 PM

10. 
    jakewire liked post by Micky Duck On thread : Poppy

    208157208157208157

    Liked On: 15-10-2022, 04:28 PM

11. 
    jakewire liked post by Micky Duck On thread : Poppy

    Well folks,thought it was about time I typed up our journey so far... after our annual May holiday chasing ducks around,the Mrs said we were off for a drive tomorrow,to Ranfurly to pick up a new...

    Liked On: 15-10-2022, 04:27 PM

12. 
    jakewire liked post by 57jl On thread : 6.5 creedmoor

    Winchester 760 works well for me

    Liked On: 14-10-2022, 09:53 PM

13. 
    jakewire liked post by Fssprecision On thread : unknown .22 pump action

    So just to clear this up I was one of the Gunsmiths involved with the tube mag mods and did over 400 guns and I remember having to modify these Brownings. The test is to remove the inner tube and...

    Liked On: 14-10-2022, 08:56 PM

14. 
    jakewire liked post by Frogfeatures On thread : 9.3x62 loads

    I’ll post some pics when my Husky arrives. :thumbsup:

    Liked On: 14-10-2022, 08:50 PM

15. 
    jakewire liked post by akaroa1 On thread : Marlin Ballard restoration

    Then on to the much more enjoyable task of seeing that lovely piece of walnut hiding under nearly 150 years of dirt and oil 207938 It's pretty exciting to see walnut like that on a no.4...

    Liked On: 12-10-2022, 06:02 PM

Page 8 of 219 First 1234567891011121314151617181920212258108 ... Last

• Jump to page: