johnd
Member

1412 Likes

Page 47 of 95 First ... 3334353637383940414243444546474849505152535455565758596061 ... Last

• Jump to page:

1. 
   zimmer liked post by johnd On thread : Te Puke Rifle club shooting this weekend

   Took this photo yesterday. There are 3 Ballinger belt winners in it. And an under 21 NZ team member from 2019/20 A great day out with wind swings of 4 MOA left and right of center We relegate the...

   Liked On: 24-01-2021, 05:12 PM

2. 
   veitnamcam liked post by johnd On thread : DIY Induction Annealer

   Here is my annealer using MGNZ's shield design. I have mounted it all in an ACM case I designed. The blue LED you see when the annealer is running is taken directly from the ZVS board to give a...

   Liked On: 17-01-2021, 05:28 PM

3. 
   csmiffy liked post by johnd On thread : Reloading press

   Depending how accurate you want /need to be think twice about the quick lok systems. I found they tend to wind back out and dont provide a consistent lock up and therefor consistent measurement....

   Liked On: 16-01-2021, 07:18 PM

4. 
   Moa Hunter liked post by johnd On thread : Any one seating bullets using a graphite powder?

   I use a cotton bud dipped in the graphite and tapped on the side of the jar. Twirl it around inside the neck after it has been filled with powder. Otherwise the powder filling process will erode it...

   Liked On: 11-01-2021, 02:46 PM

5. 
   Steelisreal liked post by johnd On thread : Belmont rifle powder 763

   The results I have had with GRT and MR2000 ( 763) have been right on the money, validated speeds with Labradar Even the OBT seems to give better accuracy results, by going to the node / 1/2 node.

   Liked On: 06-01-2021, 10:49 AM

6. 
   Morepork liked post by johnd On thread : Induction Annealer project parts swap

   Ok I will get some in when they go back to work, I will just get the one flavour can be either 750 or 800'F you three can thrash it out or I can make an executive decision and get 800'F. It tends to...

   Liked On: 05-01-2021, 06:25 PM

7. 
   distant stalker liked post by johnd On thread : Induction Annealer project parts swap

   I reckon you could put templaque into repurposed nail varnish bottles, I'll see what I have left when I do my toenails next.

   Liked On: 02-01-2021, 10:48 PM

8. 
   Steve123 liked post by johnd On thread : Discussion on NZ Hunting moving forward - NZGuns

   Sadly I think the "hunter access" via tracks would quickly become cyclist tracks and get those dangerous people outta here, my vegan wife feels offended by their presence.

   Liked On: 23-12-2020, 09:38 PM

9. 
   17brno liked post by johnd On thread : Economical Gong Gun cartridge?

   I think that one of the most affordable and economical gong rounds would have to be the .308, if you take the standard 155 grain projectile shot out to 100 yards competitively (these can be had for...

   Liked On: 14-12-2020, 12:32 PM

10. 
    Trout liked post by johnd On thread : Economical Gong Gun cartridge?

    I think that one of the most affordable and economical gong rounds would have to be the .308, if you take the standard 155 grain projectile shot out to 100 yards competitively (these can be had for...

    Liked On: 05-12-2020, 07:10 AM

11. 
    Ben-tard liked post by johnd On thread : Economical Gong Gun cartridge?

    I think that one of the most affordable and economical gong rounds would have to be the .308, if you take the standard 155 grain projectile shot out to 100 yards competitively (these can be had for...

    Liked On: 04-12-2020, 10:39 PM

12. 
    tikka liked post by johnd On thread : Economical Gong Gun cartridge?

    I think that one of the most affordable and economical gong rounds would have to be the .308, if you take the standard 155 grain projectile shot out to 100 yards competitively (these can be had for...

    Liked On: 04-12-2020, 08:34 AM

13. 
    veitnamcam liked post by johnd On thread : Economical Gong Gun cartridge?

    I think that one of the most affordable and economical gong rounds would have to be the .308, if you take the standard 155 grain projectile shot out to 100 yards competitively (these can be had for...

    Liked On: 04-12-2020, 06:34 AM

14. 
    Moa Hunter liked post by johnd On thread : How Could This Happen ?

    I blame the internet, I feel sorry for your mate and every other person that has had a "close call" Every forum on hunting has a thread about the "easy deer" by the hut, we are putting it into...

    Liked On: 11-11-2020, 08:29 PM

15. 
    ANTSMAN liked post by johnd On thread : Shooting bag filler

    Be warned if you use edible substances as a filler ( rice pasta etc ) when you take it out of the garage / shed to use it, it will have mouse holes in it and you will have fat mice.

    Liked On: 10-11-2020, 10:21 AM

Page 47 of 95 First ... 3334353637383940414243444546474849505152535455565758596061 ... Last

• Jump to page: