Dont take my experience as the end of it, they offer it for a reason in that it works for some folk. If you go along and see them and are serious about having it done they will offer you a try out...
Liked On: 01-06-2017, 11:25 PM
I went heavy on the projectile in my 222 not as heavy as they go in 223 . I use 55 grain hornady soft points. Group well and kill well too. I use AR 2208 and 2206. If you do go lighter on the pills...
Liked On: 28-05-2017, 08:22 PM
Yeah I'm on the fence, I have had occasion where the dog sees something and knows what it is from a great distance ( prey ) Like paddling out to a duck 250 M away and then I have occasions when the...
Liked On: 27-05-2017, 02:03 PM
How about an NZ made Bradely ? there was one in Hamils in Tga a while back..... very underated.
Liked On: 24-05-2017, 07:08 PM
Yep case capacity is diminished, I got about 52.5 grains capacity compared to a 260 case that typically ran 55.5. electing to use a faster powder (2208) and light projectiles ( 120 Grain ) meant it...
Liked On: 17-05-2017, 09:52 PM
I would hope so, if you are leaving a thick deposit inside your precision made die, then any "build up " is going to effect how they perform. To avoid any moisture issues with my dies I keep them in...
Liked On: 17-05-2017, 04:45 PM
Winchester pistol primers and buy them by the 5000 or 10 000, do a search and talk to your local club members on what deals they get. If its a small club look to meet people from a larger club to do...
Liked On: 21-04-2017, 06:59 PM
Personally I wouldnt bother with the 2217, fine for magnums but if you are starting with compressed loads you dont have anywhere to go. I also think compressed loads are not for a begginner or...
Liked On: 14-04-2017, 06:27 PM
So when you have resized the case, does it fit in your chamber with the bolt closing easily or are you having to force the bolt down a bit compared to an empty chamber. If this is the case ( pun not...
Liked On: 13-04-2017, 09:18 PM
So when you have resized the case, does it fit in your chamber with the bolt closing easily or are you having to force the bolt down a bit compared to an empty chamber. If this is the case ( pun not...
Liked On: 13-04-2017, 08:18 PM
Apologies if its been done to death, nothing showed in the search, so here goes. So I am considering going to a 6.5 but which one? Most of the shorter versions seem to be trying to emulate the 6.5...
Liked On: 07-04-2017, 10:06 PM
Nice work there and a great reason to recondition that old girl. As young fellas shooting remingtons we always used to give the guys with 600's a hard time, "plastic!! " guns with bent bolts !! And...
Liked On: 05-04-2017, 11:35 PM
Sounds creepy to me:P
Liked On: 31-03-2017, 03:33 PM
Sounds creepy to me:P
Liked On: 31-03-2017, 02:47 PM
For a number of years I was running 5's for pheasant and then 8's for quail. Swapping them in and out as I tried to predict what was around the corner. A good ( successful ) mate told me to use...
Liked On: 26-03-2017, 08:50 PM