Longrun
Member

274 Likes

Page 7 of 19 First 12345678910111213141516171819 Last

• Jump to page:

1. 
   Longrun liked post by makka On thread : Rem 700 LA value

   I have an old 338 lapua barrel with enough length to cut and rechamber, so I'm half way there

   Liked On: 15-07-2023, 10:17 PM

2. 
   Longrun liked post by grandpamac On thread : overlap between cartridges

   Greetings, The 8x57 was introduced in 1888 and was not a Mauser cartridge originally. The 7x57 was introduced in 1892 following the 7.65 x 53 in 1889. Regards Grandpamac.

   Liked On: 06-07-2023, 02:00 PM

3. 
   Longrun liked post by 199p On thread : 22-250 twist rate

   Rebarrel a second hand rifle with a fast twist instead my 22x47lap shoots lights out with the 88eldm that greg built up

   Liked On: 28-06-2023, 12:37 PM

4. 
   Longrun liked post by Shamus_ On thread : Tikka T3X barrel break-in

   Clean it then just shoot it

   Liked On: 27-06-2023, 10:31 PM

5. 
   Longrun liked post by ChrisW On thread : 7mm projectiles

   ELDM, and send them a round that's a mm or so shorter than mag length, imo.

   Liked On: 27-06-2023, 07:17 PM

6. 
   Longrun liked post by Kelton On thread : 7mm ss cs 7mm saum vs 7mmsst

   If you must use the action the 300 saums alot better option for the short barrel

   Liked On: 27-06-2023, 04:04 PM

7. 
   Longrun liked post by rambo-6mmrem On thread : Auckland Gunsmith

   take it to reloaders the guy they use is extremely good I get a shit ton of work done by him prices are pretty reasonable aswell

   Liked On: 25-06-2023, 02:43 PM

8. 
   Longrun liked post by gundoc On thread : Sealing walnut stock

   I always use lacquer based sanding sealer then sand it off with fine wet & dry. That fills the pores before you apply an oil finish. I always use artist's linseed oil for that, available at any art...

   Liked On: 20-06-2023, 02:40 PM

9. 
   Longrun liked post by Tentman On thread : 303-25 reloading

   Two things to consider are your barrel twist, and the action. The one I had was a very slow twist (1:12 or 1:14 - I don't recall) in a Lee Enfield action so rear locking. If it was a 1:10 twist in...

   Liked On: 08-06-2023, 10:43 PM

10. 
    Longrun liked post by 6.5 CRD On thread : 6.5 Creedmoor? whats everyones thoughts? on hunting performance

    Rl26 makes a big difference. Doesnt get anywhere near 2900 with anything else.

    Liked On: 07-06-2023, 04:52 PM

11. 
    Longrun liked post by 7mm tragic On thread : Selling your rifle - include a shot target?

    Or shoot them at 25 yards and claim them as 100 yards.

    Liked On: 07-06-2023, 04:02 PM

12. 
    Longrun liked post by Barry the hunter On thread : Pureoras

    just a good point about winter and deer - if the Pureoras are anything like Te Urewera which I know well then the deer go high in winter - why you ask - well days are shorter and what sun there will...

    Liked On: 01-06-2023, 10:12 AM

13. 
    Longrun liked post by 7mm tragic On thread : Pureoras

    It's not cold at the moment so I don't think that will be a factor.

    Liked On: 29-05-2023, 07:53 PM

14. 
    Longrun liked post by akaroa1 On thread : Walnut and blued steel,

    224959

    Liked On: 26-05-2023, 08:46 PM

15. 
    Longrun liked post by akaroa1 On thread : Walnut and blued steel,

    Another one finished that belongs in here Winchester 1885 parts rifle. Vulcan 30 cal 1:10" 26" long 30-40 U.S. Gov't Leupold M8 3x I have built it as an every day carry classic . Good...

    Liked On: 26-05-2023, 08:46 PM

Page 7 of 19 First 12345678910111213141516171819 Last

• Jump to page: