longshot
Member

492 Likes

Page 18 of 33 First ... 4567891011121314151617181920212223242526272829303132 ... Last

• Jump to page:

1. 
   NewbieZAR liked post by longshot On thread : Rem 788 advice

   Theoretically possible, impractical in practice. Just for interest of anyone reading this thread in future, if you have enough skill to make a stock, you could probably make a small jig to hold...

   Liked On: 16-01-2023, 08:57 PM

2. 
   Synthetic liked post by longshot On thread : A reflection and a reminder - Unsafe act

   This thread has been quite an interesting read, it never hurts to be reminded of the importance of safety when using firearms, and it’s important to have the confidence to call out sloppy behaviour...

   Liked On: 18-12-2022, 09:12 AM

3. 
   Micky Duck liked post by longshot On thread : A reflection and a reminder - Unsafe act

   This thread has been quite an interesting read, it never hurts to be reminded of the importance of safety when using firearms, and it’s important to have the confidence to call out sloppy behaviour...

   Liked On: 18-12-2022, 08:41 AM

4. 
   Micky Duck liked post by longshot On thread : Area Contamination

   I have watched two sets of spooked hind quarters crashing away through the bush without enough showing to identify for a safe or ethical shot, turned 90 degrees to the right to see a yearling crest...

   Liked On: 26-10-2022, 05:11 PM

5. 
   Shearer liked post by longshot On thread : PCP air rifle for left handers.

   AGT Vixen You can get them from Young’s Airguns

   Liked On: 23-10-2022, 05:15 PM

6. 
   Shearer liked post by longshot On thread : Torqueing screws for cheapskates

   My offer still stands, and includes bore sighter as well. I put it out there because judging by the content of the thread thus far, there is a high chance you will be second guessing yourself at...

   Liked On: 12-10-2022, 08:09 PM

7. 
   Eat Meater liked post by longshot On thread : Torqueing screws for cheapskates

   My offer still stands, and includes bore sighter as well. I put it out there because judging by the content of the thread thus far, there is a high chance you will be second guessing yourself at...

   Liked On: 12-10-2022, 08:09 PM

8. 
   dannyb liked post by longshot On thread : Torqueing screws for cheapskates

   My offer still stands, and includes bore sighter as well. I put it out there because judging by the content of the thread thus far, there is a high chance you will be second guessing yourself at...

   Liked On: 12-10-2022, 08:09 PM

9. 
   Eat Meater liked post by longshot On thread : Torqueing screws for cheapskates

   If you haven’t already fitted your scope you’re welcome to borrow mine. I’m close enough to Carterton that it won’t be inconvenient for anyone. If you end up having to re torque your scope after...

   Liked On: 12-10-2022, 08:01 PM

10. 
    RV1 liked post by longshot On thread : Torqueing screws for cheapskates

    https://www.sheldonbrown.com/tork-grip.html Just to be clear this is not a dig at the method outlined by the OP, I post because anyone reading this thread will appreciate it.

    Liked On: 12-10-2022, 02:06 PM

11. 
    csmiffy liked post by longshot On thread : browning trombone .22 stock

    That is a job you could actually quite easily DIY for

    Liked On: 11-10-2022, 06:49 PM

12. 
    Steelisreal liked post by longshot On thread : Torqueing screws for cheapskates

    Years ago when ordering online was still fairly novel, I looked at buying a torque wrench online, found that website, just quietly I didn’t realise it was a piss take at first, gave up reading...

    Liked On: 10-10-2022, 07:38 PM

13. 
    MB liked post by longshot On thread : Torqueing screws for cheapskates

    If you haven’t already fitted your scope you’re welcome to borrow mine. I’m close enough to Carterton that it won’t be inconvenient for anyone. If you end up having to re torque your scope after...

    Liked On: 10-10-2022, 06:54 PM

14. 
    Moa Hunter liked post by longshot On thread : Torqueing screws for cheapskates

    I use a torque wrench because I have one from a previous career. Before the torque wrench I used to just crank them up to ‘just before they went loose again’. Never came unstuck with steel on steel...

    Liked On: 10-10-2022, 06:47 PM

15. 
    dannyb liked post by longshot On thread : Torqueing screws for cheapskates

    If you haven’t already fitted your scope you’re welcome to borrow mine. I’m close enough to Carterton that it won’t be inconvenient for anyone. If you end up having to re torque your scope after...

    Liked On: 10-10-2022, 06:35 PM

Page 18 of 33 First ... 4567891011121314151617181920212223242526272829303132 ... Last

• Jump to page: