If buying a new rifle or shotgun ask the retailer for a list of basic parts and if they can not support the product with spares don't buy And out them on here I brought a Baikal single shot 12...
Liked On: 28-08-2022, 10:57 AM
Firstly, we need to support professionals and small businesses making parts like this we need to value them and be prepared to pay well over what the factory spare might be. We need to keep them in...
Liked On: 27-08-2022, 09:08 PM
The Howa is hands-down the best value for money, a good design and well made. The Ruger American is also a good action but needs some work to get running nicely. Zastava's are OK but a bit sloppy in...
Liked On: 26-08-2022, 02:21 PM
It doesn't have the engine management system, just the 6.2 litre LS3 and a 6 speed manual. It averages 22 mpg (13 litres per 100 k's) and open road cruising in 6th gear is 105 kph @ 1500 rpm.
Liked On: 20-08-2022, 10:53 PM
https://www.youtube.com/watch?v=2oq0YNo02KM&ab_channel=Bits%26Gags
Liked On: 19-08-2022, 12:59 PM
BRO throw it away with NO label and not sure what it is. DO NOT GO THERE even if you are a well-versed reloader as Micky Duck said you could lose your eyes if not worse stick to what you know it...
Liked On: 18-08-2022, 11:54 PM
Or a Miroku reject....I think they market them as a brown clitoris . Something like that.
Liked On: 09-08-2022, 07:31 PM
During the summer period there is usually a tracer ban in all military training areas, cause they start LOTS of fires. Just look to the East when you drive the Desert road! The ammo technicians...
Liked On: 07-08-2022, 11:32 AM
Locate a stud in your wardrobe and use a couple of 75mm long, 10mm galvinised hex head coach bolts with good sized washers behind the hex heads. If there is a skirting board inside the wardrobe and...
Liked On: 28-07-2022, 11:34 PM
The photo was taken only few days ago, and I found from my local fishing forum. This is the first time, I actually see people caught king fish in north-east water of China. The guy did `t tell me...
Liked On: 23-07-2022, 04:39 PM
Thought I would start a thread about my new work rig, I'll have questions and be looking for advice setting it up etc so figured it would be best to keep it all in one place. It's a 1993 Mercedes...
Liked On: 14-07-2022, 03:50 PM
Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
Liked On: 10-07-2022, 09:36 PM
Use AP70. I use it for small game loads in most of my "big"" rifles. Unique and Universal/AP70N was specifically designed for low powered loads. In a high velocity cartridge, such as the .303,...
Liked On: 10-07-2022, 03:14 PM
I'm stunned that fuel economy in modern 4x4's is this 'poor' for want of a better term. In the mid 90's I rebuilt a series III stage1 v8 Land rover. So permanent 4x4. Dropped a 6.5L V8 diesel out...
Liked On: 08-07-2022, 01:42 PM
I’ve seen all sorts of nice customs in Allen Carrs workshop, and a lot of them had nice open sights. He’d be the first place I’d look if it were me.
Liked On: 03-07-2022, 10:17 PM