I think it goes both ways, I'd always try and find the owner of a found item hoping that if I ever lost anything it may find its way back to me.
Liked On: 12-11-2023, 08:41 PM
I often wonder if the fellas who trade in a good n faithful wife ,the mother of thier kids and who was great homemake and no slouch between the sheets for some younger slimmer model with less sag and...
Liked On: 10-11-2023, 08:15 PM
It's an option to get a local fabricator to weld up a box out of 6mm steel and hang a door on with a couple of Ross 5 lever locks I made my own as a smaller unit and it cost, very roughly $300 per...
Liked On: 10-11-2023, 09:14 AM
10ft Shipping container?
Liked On: 10-11-2023, 09:13 AM
I follow him on youtube. He has a lot of interesting vids especailly around motorbikes.....And being Canadian, tends to be more along the sort of things we do here...
Liked On: 03-11-2023, 08:10 PM
Victory knife next step up from Bacho https://victoryknives.co.nz/lightweight-hunters-set/ or you can buy a drop point or Rabbiters Knife for about $30 OR TM...
Liked On: 31-10-2023, 07:38 PM
Micky Duck the mythical beast+and part of my sock as a bonus). The aperture seems to be about 150 m and the tangent 100 for the rifle barrel at least. Don't fire this prone, even a bench is bad. The...
Liked On: 29-10-2023, 07:48 PM
Be very careful when you do this...My brother had a 'gunsmith' do this for him and now his rifle will fire on closing if it is slammed shut in a hurry. The difference between good and dodgy seems to...
Liked On: 26-10-2023, 04:46 PM
236082 I thought we used IMR 4064 at first but this must be pretty old. 236083 I did start with the silver 180gr but soon went to 130 which were really good. Ive got half a dozen empty boxes...
Liked On: 25-10-2023, 08:49 PM
How many hours do you intend to use the motor yearly? A 2 stroke is vastly less finicky over storage, irregular use, maintenance costs etc etc. The 2 stroke isn't that much noisier than a 4...
Liked On: 23-10-2023, 12:19 PM
I'm trying to take the policy " if you can't say anything nice, don't say anything" Sometimes its hard ! But there are lots of clubs only just hanging in there and they rely on fewer and fewer...
Liked On: 22-10-2023, 08:35 PM
Fucking rabbit hole! Got the bugger going by the end of the day. Don't try operating this machine pissed or stoned!https://uploads.tapatalk-cdn.com/20231015/af6b3139c064e460c4405c3875ee58dc.jpg ...
Liked On: 15-10-2023, 08:04 PM
The cheap ones are not a suitable replacement for a decent balance beam scale imo, as they tend to drift a fair bit.
Liked On: 14-10-2023, 04:35 PM
Yes, but also no. You haven’t mentioned tyre pressures. Tyre pressure and footprint trumps a fully inflated MT tread pattern pretty much every time. The sensible money is on a decent AT tyre...
Liked On: 10-10-2023, 10:41 PM
Well, I used to think that too. Then I had the experience of hitting a wet clay pan in a brand new ranger still on road/factory tyres... I was slowly sliding downhill into a strainer post, and...
Liked On: 10-10-2023, 09:30 PM