I genuinely thought this was a thread about using a sling and stone versus a rifle (bang stick). Slightly disappointed lol Identify your target beyond all doubt because you never miss (right?) and...
Liked On: 13-06-2023, 05:50 PM
Yes just a unhelpful "back in my day". Sorry I'm going to bite again.. (keyboard warrior doh). Your stand point is moot, when you were the young generation the exact same would have been said by the...
Liked On: 12-06-2023, 09:41 PM
Get a set of Sportsmatch rings for the Tikka. About the strongest set of rings you can find, and are well priced. Think $80 vs $300+ for the optiloks. I have a set of the Sportsmatch on each of my...
Liked On: 11-06-2023, 03:13 PM
I agree with the above but will also put out there maybe some work on form/natural point of aim and controlling recoil may help? A different stock shape perhaps? My PRC is fairly light and...
Liked On: 15-05-2023, 11:09 AM
I verified the bc in strelock like said in the comments also changed the scope data as discussed. This matched up the amount of clicks at 500 to the correct amount of clicks at 400 . I am yet to...
Liked On: 02-05-2023, 07:35 PM
I assume your a new shooter with little experience in the field. If this is correct then please remember that shooting game at long range is not as easy as point and shoot. Once you get out past say...
Liked On: 11-04-2023, 10:34 PM
Calculators aside, how can that be, a bullet surely must have an advantage going downhill as opposed to up. A bullet not shot but dropped from the top of a cliff will accelerate to TV in free fall. A...
Liked On: 05-04-2023, 02:00 PM
also ..if you set up scales at or close to eye height it makes life easier..I have small wooden box screwed onto my heavy wooden reloading bench,scales sit on top of that with trickler off to side so...
Liked On: 29-03-2023, 03:08 PM
I had exactly these symptoms in 6.5PRC when I changed to a resizing lube which was more greasy and my normal wiping on a cloth didn't clean it off properly. I would recommend cleaning the brass...
Liked On: 03-03-2023, 04:52 PM
When you select the cartridge you are loading for GRT will give you the max pressure - with mine when I select 223 it gives me the SAAMI maximum. With other cartridges it doesn't specify who set the...
Liked On: 16-02-2023, 08:01 PM
Believe me, it doesn't matter what fancy bore cleaner you use, if it's just using patches, there's no guarantee the bore will end up fully clean even when the patch comes out spotless. This is...
Liked On: 12-02-2023, 11:30 PM
All 3 will kill fine if you do your bit.
Liked On: 08-02-2023, 09:31 AM
Yup buy the dies projectiles, primers then get someone to give you a hand. Hopefully they have a selection of suitable powders then once the load is sorted you only have one powder to buy.
Liked On: 11-01-2023, 09:54 PM
slow down till you going too slow,then slow down some more...much looking,less walking= better sucess rate.
Liked On: 17-12-2022, 09:53 PM
Greetings all, It was all warm and horrible outside this morning so I thought I should find out what three of my oldest manuals had to say on pressure estimation. They were Reloading Simplified by...
Liked On: 12-12-2022, 03:14 PM