Magnus
Member

115 Likes

Page 1 of 8 12345678 Last

• Jump to page:

1. 
   Magnus liked post by blip On thread : Barrel cleaning

   Grabs comfy chair and popcorn :)

   Liked On: 10-01-2024, 11:47 PM

2. 
   Magnus liked post by Moa Hunter On thread : Chrono thoughts

   I have a pro chrono and had some problems initially. These were due to it being too close to the muzzle blast. Moving it back to 5 metres from the muzzle fixed it. Then adding a correction to get...

   Liked On: 04-11-2023, 04:35 PM

3. 
   Magnus liked post by Tedz50 On thread : Home Brew Black Powder........Craft Powder?

   Cannons are an easy way to use hands full of powder. 230196230197

   Liked On: 10-08-2023, 09:01 PM

4. 
   Magnus liked post by GriffyGriff On thread : Browning Blr takedown

   I thought I’d share my experience with a BLR 81 Takedown .308 I’m nearly 60, but still quite good with scoped rifles, but all the rifles I have are not ideal bush stalkers, so I thought I’d change...

   Liked On: 10-08-2023, 08:58 PM

5. 
   Magnus liked post by Makros On thread : Half cock or safety

   You misunderstand the meaning of cocked. The firing pin is cocked no matter whether it is retained by the sear or not. The M70 and most of our modern rifles are based off the Gewehr M98 a "cock on...

   Liked On: 26-07-2023, 09:50 PM

6. 
   Magnus liked post by STC On thread : Half cock or safety

   Empty chamber. Having a deer 10m in front of me and failing to shoot it, does not put me off hunting. Accidently injuring or killing myself or a loved one definitely will...

   Liked On: 26-07-2023, 08:58 PM

7. 
   Magnus liked post by Dundee On thread : my old man

   Condolences

   Liked On: 22-06-2023, 05:08 PM

8. 
   Magnus liked post by 300CALMAN On thread : Strelok Sanctioned

   Best solution, don't by a crapple iphone.

   Liked On: 14-04-2023, 10:45 PM

9. 
   Magnus liked post by Rated M for Magnum On thread : Tikka bell and carlson stock

   I do recall though that my Sako a7 rough tech was 30 inch pounds with a plastic trigger guard...I'd say if you wanted to experiment, start at the Tikka recommended and work down looser. Just my 2...

   Liked On: 04-04-2023, 09:16 PM

10. 
    Magnus liked post by Rated M for Magnum On thread : Tikka bell and carlson stock

    My Tikka manual says 44 inch pound for plastic trigger guard and 62 inch pounds for metal trigger guard. Say it with me INCH pounds :D 220278

    Liked On: 04-04-2023, 07:51 PM

11. 
    Magnus liked post by Micky Duck On thread : Downhill shot

    point and shoot.....job done.

    Liked On: 04-04-2023, 05:47 PM

12. 
    Magnus liked post by Moa Hunter On thread : Tikka bell and carlson stock

    I would look up what B&C say. I put a B&C stock on a mates T3 last year and it transformed it. They still need a skim bed on the Ali bedding block. So relieve the Ali block and wrap tape around the...

    Liked On: 04-04-2023, 01:14 PM

13. 
    Magnus liked post by Kelton On thread : Tikka bell and carlson stock

    I'd use tikkas factory specs and check for accuracy as your still screwing against their less than ideal bottom metal which fails if over torqued, unless you have swapped out the triggergaurd/btm...

    Liked On: 04-04-2023, 01:13 PM

14. 
    Magnus liked post by dannyb On thread : Tikka bell and carlson stock

    This is what Weatherby advise for there stocks, this is what I use for my mk v composite stock with bedding block. They list different values for wood, carbon, composite and synthetic, I imagine...

    Liked On: 03-04-2023, 09:22 PM

15. 
    Magnus liked post by Bobba On thread : .357 desert eagle

    Lock stock Snatch Rock n Rolla And the new one The gentlemen all my favourites

    Liked On: 27-03-2023, 05:39 PM

Page 1 of 8 12345678 Last

• Jump to page: