Marty Henry
Member

4639 Likes

Page 87 of 310 First ... 37737475767778798081828384858687888990919293949596979899100101137187 ... Last

• Jump to page:

1. 
   rossi.45 liked post by Marty Henry On thread : beeswax lube and spay painting bullets

   Stand a whole bunch of projectiles upright in a flat pan melt your lube and pour it into the pan till it's level with the top grease groove and leave it to cool. Cut the bullets out with a "cookie...

   Liked On: 22-05-2022, 01:42 PM

2. 
   shooternz liked post by Marty Henry On thread : beeswax lube and spay painting bullets

   Stand a whole bunch of projectiles upright in a flat pan melt your lube and pour it into the pan till it's level with the top grease groove and leave it to cool. Cut the bullets out with a "cookie...

   Liked On: 22-05-2022, 11:26 AM

3. 
   Micky Duck liked post by Marty Henry On thread : Sto

   Forget the semi, forget the o/u, and get a side by side its the only proper wild fowl gun.

   Liked On: 21-05-2022, 07:09 PM

4. 
   Micky Duck liked post by Marty Henry On thread : Optima suppressor vs Terminator brake

   Like stop snoring and give the bloody blankets back between you and the cat there's no room left for me, that sort of thing?

   Liked On: 21-05-2022, 11:43 AM

5. 
   dannyb liked post by Marty Henry On thread : Hunting Scope Magnification

   1-8, 3-9, 4-16 all have their place. I probably use the rifle with the 1-8 most.

   Liked On: 21-05-2022, 09:05 AM

6. 
   Carpe Diem liked post by Marty Henry On thread : Luring deer to a feeder

   They were siphoning it off and selling it to buy maize, turnips and salt licks.

   Liked On: 19-05-2022, 04:57 PM

7. 
   rewa liked post by Marty Henry On thread : First casts

   Most likely your mold was either too cold or the lead was or both, they would be shootable but don't expect stellar results still not bad for a first attempt. Beeswax and lard is a traditional lube...

   Liked On: 16-05-2022, 09:07 PM

8. 
   hunter Al.7mm08 liked post by Marty Henry On thread : Chainsaw question - engine dies

   Perished fuel hose is another contender I would look at first.

   Liked On: 14-05-2022, 07:45 PM

9. 
   Borris liked post by Marty Henry On thread : Ballistic data for hunting applications

   This, no faffing around required used with a mil dot or bdc type reticle is the quickest accurate way to do it. Wind is still guesswork unless out have a weather station.

   Liked On: 14-05-2022, 11:25 AM

10. 
    6x47 liked post by Marty Henry On thread : Speed kills?

    Depleted uranium shot would be the go I reckon. "Federal atomic cloud duck ammo fry them in flight" would be a great advertising slogan (-:

    Liked On: 12-05-2022, 08:47 AM

11. 
    Moa Hunter liked post by Marty Henry On thread : Speed kills?

    That's where the trade off is. Steel looses velocity faster because it's approx 30 % lighter than lead but on the plus side as shot charges are measured by weight not pellet count you get about 30%...

    Liked On: 11-05-2022, 11:12 PM

12. 
    sore head stoat liked post by Marty Henry On thread : Speed kills?

    That's where the trade off is. Steel looses velocity faster because it's approx 30 % lighter than lead but on the plus side as shot charges are measured by weight not pellet count you get about 30%...

    Liked On: 11-05-2022, 05:32 PM

13. 
    Love_ducks liked post by Marty Henry On thread : Speed kills?

    That's where the trade off is. Steel looses velocity faster because it's approx 30 % lighter than lead but on the plus side as shot charges are measured by weight not pellet count you get about 30%...

    Liked On: 11-05-2022, 05:12 PM

14. 
    Moa Hunter liked post by Marty Henry On thread : Sto

    Forget the semi, forget the o/u, and get a side by side its the only proper wild fowl gun.

    Liked On: 10-05-2022, 12:37 PM

15. 
    McNotty liked post by Marty Henry On thread : Luring deer to a feeder

    They were siphoning it off and selling it to buy maize, turnips and salt licks.

    Liked On: 30-04-2022, 11:46 PM

Page 87 of 310 First ... 37737475767778798081828384858687888990919293949596979899100101137187 ... Last

• Jump to page: