If you can find a 12G Fabarm XLR these too are well worth looking at. Sister company of Caesar Guerini I think Soft Shooting, Track really nicely, come with case, full set of chokes and sling...
Liked On: 11-02-2022, 03:03 PM
you can fall in the pond, grovel out, shake the water out and keep shooting with the M2 as it's recoil operated, the 1301 is gas operated so a bit more fiddly to clean and won't cope with a full...
Liked On: 11-02-2022, 03:03 PM
280 will be fine Sent from my SM-G996B using Tapatalk
Liked On: 11-02-2022, 08:53 AM
I've been storing pistols for nearly 20 yrs. Had the inspections as you would expect. Have two long gun safes sold as "E Cat" and a recently acquired older used safe with original label stating "...
Liked On: 11-02-2022, 08:51 AM
If you refer to it as a 6mm Steel Cabinet when speaking to the police/arms officer it's a lot more straightforward, that's why the wording calls a cabinet, box and safe out as separate things. A safe...
Liked On: 11-02-2022, 08:50 AM
The approvals have to be done by a registered engineer who will sign his name to the certificate, as the Police are not qualified to make such decisions. For a one-off item it will be quite expensive...
Liked On: 11-02-2022, 08:50 AM
If it's not certified (the "approved in writing generally" bit), you need to get it inspected by the Police (the "in the particular case by a member of the Police" bit). It's probably not legal...
Liked On: 11-02-2022, 08:49 AM
Sure, as long as you are confident a member of the Police with approve it in writing for your particular case. Certified would just mean that that model has been approved, in general. Sounds...
Liked On: 11-02-2022, 08:49 AM
I have sent the query email to Permitfirearms@police.govt.nz ( today ) , "do I need a permit to import a new scope " . I will report back to here the reply when it comes
Liked On: 11-02-2022, 08:36 AM
Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...
Liked On: 11-02-2022, 08:35 AM
to me looking at the video it took 1m 24s to say just get out and shoot it . . the rest is interesting but as said takes awhile. But his method is not going to work, most people want some kind of...
Liked On: 11-02-2022, 08:31 AM
I agree, Nathan is all about hunting and field work. What Nathan emphasizes is to 'be consistent'. More than 50% of the animals I have taken have been offhand shots, so I have to hold the forend....
Liked On: 11-02-2022, 08:30 AM
JohnDuxbury , I was taught to and have been using sling wrap and hold the fore end for about 40yrs, off hand and over a pack or without, over sandbags, leaning on corners ect ect, you reckon...
Liked On: 11-02-2022, 08:30 AM
My expeience, but a couple of years old now. Although it’s about 4 years ago, the last time I applied for an Import Permit for a scope I received a letter from Kapiti which started off “Your...
Liked On: 10-02-2022, 09:26 PM
I thought I'd circle back around and thank everyone for their help. Sorted a load very quickly with 0.5grn under max delivering about 0.75" of an inch at 100m. Good enough for a new barrel and I'll...
Liked On: 10-02-2022, 09:07 PM