Not a sling guy either but when needed I have a Niggeloh which is the best I've used.
Liked On: 03-07-2023, 07:19 PM
BR4s are not hard so much as they have a thicker cup than others. Back in the days of converting 308 range rifles (no change to firing pin hole in bolt) to 6MM BR for F Class it was quite common to...
Liked On: 03-07-2023, 04:47 PM
The BR4 and 450s have thicker and harder cups that are supposed to be more pressure tollerant, hence the 450s being called magnum primers (BR4s are supposedly the same as the 450s just more...
Liked On: 03-07-2023, 04:45 PM
Love a bit of overlap that way yuo have everything covered twice :)
Liked On: 03-07-2023, 04:28 PM
Yes - from my rimfire bench experience - when I'm digging in to see what a rifle can do I usually end with four x 5 shot consecutive groups. That's a reliable test. Single groups are often not an...
Liked On: 03-07-2023, 02:16 PM
Recently I restocked with a brick or two each of RWS "Rifle Match" and "Pistol Match". With nothing better to do a bit of a Lot test seemed in order. Weather here is pretty miserable with...
Liked On: 03-07-2023, 02:14 PM
A few in the boot tonight! Just before dark. 227541 227542 227543
Liked On: 03-07-2023, 12:10 PM
A fat parry drake downed with two shots of #7 sport steel,out of 4s and only a few days to go. 227731 227732
Liked On: 03-07-2023, 12:10 PM
All over for the Wgton region. 228023 228024 228026
Liked On: 03-07-2023, 12:10 PM
Got this fella on Saturday. Saw a couple of others, but they were very spooky, and flushing a couple of hundred metres away. 228038
Liked On: 03-07-2023, 12:09 PM
I etch primed a shotgun Barrel and reciever matt black due to bad bluing and it looked great and was very durable. I was surprised how well its lasted after a good beating over the last 5 years....
Liked On: 03-07-2023, 12:08 PM
I did notice an important reduction in copper fouling after the first 40 rounds in my new Hardy barrel. I just followed my gunsmith process: 10 passes with Boretech eliminator on a brush (I used a...
Liked On: 03-07-2023, 12:08 PM
The old 12" Kea pistols with .410 slug loads were just the berries for bailed pigs. I rechambered mine for 3" shells and used it with good success on NZDA hare drives in North Canterbury many years...
Liked On: 03-07-2023, 12:06 PM
Used a chopped 20 gauge for years, added open sights, was good for 40 meters with slugs but always got in close for bail ups, seldom used over 10 meters. Would have kept it but DOC started enforcing...
Liked On: 03-07-2023, 11:53 AM
After going out last week I managed to get another trip again last evening. Wife must be happy at the moment but then again our daughter has just returned from the World Special Olympic games on...
Liked On: 02-07-2023, 03:04 PM