No.3
Member

2665 Likes

Page 166 of 178 First ... 66116152153154155156157158159160161162163164165166167168169170171172173174175176177178 Last

• Jump to page:

1. 
   caberslash liked post by No.3 On thread : No more powder

   They will probably be soaking up all plant capacity making the ball powder grades for .50, 20mm and 30mm cartridges. Consumption of those caliber components must be out through the roof in the EU...

   Liked On: 05-09-2022, 09:53 AM

2. 
   Micky Duck liked post by No.3 On thread : Hornady 168g hollow point match

   Can be a little unreliable from my experience which is honestly limited to observing a couple of animals dropped at pretty much standard ranges, with that bullet in the factory Hornady match loads. ...

   Liked On: 04-09-2022, 10:01 PM

3. 
   XR500 liked post by No.3 On thread : Vitara JLX 2WD AUTO

   Ha, I hate that adaptive cruise control with a passion. COme up behind a slow car and if you aren't thinking you realise you've been following them at 80Km/h in a 100 or 110 zone for the last...

   Liked On: 04-09-2022, 07:43 PM

4. 
   Micky Duck liked post by No.3 On thread : 2015+ Hilux front recovery/tie down points

   It's not just the towball, if you are using a drop hitch that's loose in the tow bar receiver that's a fail point potentially as well - a lot of aftermarket shackle fittings that are designed to slot...

   Liked On: 03-09-2022, 10:03 PM

5. 
   Russian 22. liked post by No.3 On thread : Firearms Registry Consultation Open

   Just read the job description - "experience with firearms may be an advantage but is not necessary". Shows how much they value and believe in their rhetoric when they don't even think experience...

   Liked On: 03-09-2022, 07:20 PM

6. 
   outlander liked post by No.3 On thread : Firearms Registry Consultation Open

   Just read the job description - "experience with firearms may be an advantage but is not necessary". Shows how much they value and believe in their rhetoric when they don't even think experience...

   Liked On: 03-09-2022, 01:17 PM

7. 
   outlander liked post by No.3 On thread : Firearms Registry Consultation Open

   So where do we find the definition of what is a major part? No barrels have serial numbers these days, so if you have a spare tube or two that are a generic part what gives with those? Where does...

   Liked On: 03-09-2022, 01:14 PM

8. 
   Ranger 888 liked post by No.3 On thread : Firearms Registry Consultation Open

   So where do we find the definition of what is a major part? No barrels have serial numbers these days, so if you have a spare tube or two that are a generic part what gives with those? Where does...

   Liked On: 02-09-2022, 11:08 AM

9. 
   Ingrid 51 liked post by No.3 On thread : Firearms Registry Consultation Open

   Just read the job description - "experience with firearms may be an advantage but is not necessary". Shows how much they value and believe in their rhetoric when they don't even think experience...

   Liked On: 02-09-2022, 10:58 AM

10. 
    Moa Hunter liked post by No.3 On thread : Ring/groove at base of case shoulder

    Who was it that suggested out with the hacksaw and internally inspect? Bit dear on a chamber though, but I still say it's worth it for the education of the great unwashed on here!!!!!!!

    Liked On: 30-08-2022, 09:34 PM

11. 
    shooternz liked post by No.3 On thread : .22lr barrel break in and cleaning

    Not in theory, but keep an eye on it in humidity conditions. Also monitor for lube/crap buildup in the extractor slot and action areas, and in the barrel. A careful use of a bore snake will...

    Liked On: 30-08-2022, 12:35 PM

12. 
    Finnwolf liked post by No.3 On thread : Replacing no longer available rifle parts..

    Now if my failing memory banks are in any way still functional - that model Norinco was a knock off of a Stirling from the Phillipines, which was in itself a knock off of one of the Eastern European...

    Liked On: 29-08-2022, 01:08 PM

13. 
    Micky Duck liked post by No.3 On thread : Car headlight upgrades

    Add a pair of LED 'driving lights' switched off the high beam, and a set of 'work lights' or a light bar for when you are off road helps but it doesn't sort the issue of being on rural roads with a...

    Liked On: 28-08-2022, 08:20 PM

14. 
    7mmwsm liked post by No.3 On thread : Chassis for hunting, why are they not more common in nz?

    I did have a go on one that had been built by it's owner (who was an engineer and machinist). It was... minimalist - if you can call something that barely registered against the barreled action...

    Liked On: 28-08-2022, 09:01 AM

15. 
    tikka liked post by No.3 On thread : Silky saws

    F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

    Liked On: 27-08-2022, 10:27 PM

Page 166 of 178 First ... 66116152153154155156157158159160161162163164165166167168169170171172173174175176177178 Last

• Jump to page: