One of the main considerations for petrol vs diesel is how much the load factor changes on the vehicle. Petrol can be very economical especially with the modern systems that shut off at the lights...
Liked On: 07-06-2022, 07:41 PM
One of the main considerations for petrol vs diesel is how much the load factor changes on the vehicle. Petrol can be very economical especially with the modern systems that shut off at the lights...
Liked On: 07-06-2022, 06:54 PM
I took it to mean that your gauge isn't returning to zero when there isn't any pressure on the unit at all? What that means is that the bourdon tube in the gauge has stretched for want of a better...
Liked On: 02-06-2022, 12:30 AM
This is going to be a bit of an unpopular comment, but the two tyres I've had really good runs out of are the RF10 10-ply light truck version (don't seem to be that easy to get now but rather good at...
Liked On: 31-05-2022, 04:30 AM
I just got a No4 globe off them, probably the last in the wild in NZ though. The spares like that shaft can definitely still be got from overseas, Ebay is another option. Awesome lamps, mine (or...
Liked On: 29-05-2022, 10:36 PM
The only thing that Micheal Wood has going for him is that he's better than Poto Williams, Kris Faafoi and Nanaia Mahuta... Unfortunately that's not a reference at all though. I was listening to...
Liked On: 28-05-2022, 11:38 AM
So follow up to this, got the data logging function on an app called Forscan Lite (basically a US car with CANBus type systems specific app) and using a MX+ version of the datalogger above. Very...
Liked On: 27-05-2022, 10:37 AM
This is going to be a bit of an unpopular comment, but the two tyres I've had really good runs out of are the RF10 10-ply light truck version (don't seem to be that easy to get now but rather good at...
Liked On: 24-05-2022, 06:46 PM
So follow up to this, got the data logging function on an app called Forscan Lite (basically a US car with CANBus type systems specific app) and using a MX+ version of the datalogger above. Very...
Liked On: 24-05-2022, 07:17 AM
So just thinking out loud, if I can find something that sounds feasible and sort of right, and cut and past one of those photo's of the little thingy in question in I get $50 and everyone is no wiser...
Liked On: 19-05-2022, 09:43 PM
Depends a little on the stock type too, if it's a floppy plastic one and the bedding is a little mobile loading it will change point of impact. Also, using a spiked bipod on hard surfaces can cause...
Liked On: 09-05-2022, 05:21 PM
Depends a little on the stock type too, if it's a floppy plastic one and the bedding is a little mobile loading it will change point of impact. Also, using a spiked bipod on hard surfaces can cause...
Liked On: 06-05-2022, 01:53 PM
Google up on youtube, there is a few people with vids on it. Seems like a couple of fiddly bits to look out for on the speedo unit and associated bits. Here's one:...
Liked On: 05-05-2022, 10:32 PM
Once the additive is diluted into fuel (dosage rate is less than 2% worst case) it doesn't eat much. When it's in concentrate form OMG it eats everything - including PTFE or teflon protected...
Liked On: 20-04-2022, 10:42 PM
Diesel additives have a place depending on what you think you need to achieve... I use Wynns EDT as a bug preventer and helps to keep the injectors from building up varnish as I mostly use Gull...
Liked On: 16-04-2022, 11:15 AM