Old_School
Member

134 Likes

Page 1 of 9 123456789 Last

• Jump to page:

1. 
   Deanohit liked post by Old_School On thread : What Have You Loaded Today

   Here is some 303 I loaded today. 288336

   Liked On: 30-11-2025, 10:31 PM

2. 
   Oldbloke liked post by Old_School On thread : seating die is pulling out bullets

   I was thinking of using my lathe and putting a projectile in the drill chuck and use some lapping paste and polish.

   Liked On: 26-11-2025, 01:58 AM

3. 
   flock liked post by Old_School On thread : seating die is pulling out bullets

   I was thinking of using my lathe and putting a projectile in the drill chuck and use some lapping paste and polish.

   Liked On: 23-11-2025, 09:11 PM

4. 
   Jaco Goosen liked post by Old_School On thread : seating die is pulling out bullets

   Bit of an update here, a member helped me out and had a go on his press, went through everything from annealing to case trimming, etc. We are thinking the flat bottom CAC projectiles are part of the...

   Liked On: 19-11-2025, 06:22 PM

5. 
   saljer liked post by Old_School On thread : Attention All Newby Reloaders (and you old buggers)

   Let me guess, are those cases S&B?

   Liked On: 14-11-2025, 04:53 AM

6. 
   Jaco Goosen liked post by Old_School On thread : Attention All Newby Reloaders (and you old buggers)

   Let me guess, are those cases S&B?

   Liked On: 13-11-2025, 07:03 PM

7. 
   Eat Meater liked post by Old_School On thread : Are we seeing a shift to smaller calibres and lighter bullets?

   A question on small caliber, what cartridges are considered barrel burners? Smaller calibers cannot handle as much of a charge or you can wear out the barrel fast.

   Liked On: 09-11-2025, 01:23 PM

8. 
   SneedFeed liked post by Old_School On thread : Is the 303 obsolete?

   Well here are the results from my first shoot at 200M (with my 303 let alone any other rifle) over the weekend. Was shot in the sitting position, i reckon i would have got tighter groupings had i...

   Liked On: 05-11-2025, 11:23 PM

9. 
   HuntBeta liked post by Old_School On thread : Bush Ghosts

   I heard a story about a place up in the Kaimais called "whangawhanga B Block" or something along those lines, likely the name on the title, supposed to be maori ancestral lands or something. Dont...

   Liked On: 05-11-2025, 05:27 PM

10. 
    john m liked post by Old_School On thread : Is the 303 obsolete?

    What many are forgetting is the 303 is a piece of our deer culling history, its almost like its kiwiana. Sure, it might not be your go to rifle, but it gets the job done, a great deal of kiwis have...

    Liked On: 04-11-2025, 06:42 AM

11. 
    Growlybear liked post by Old_School On thread : Shotgun style - Yes it's legal but is it a good idea?

    I dont know what the big deal is personally, while its not my type of gun, i can see its a good design from a practical standpoint, especially for possum control.

    Liked On: 02-11-2025, 07:38 PM

12. 
    Zedrex liked post by Old_School On thread : Shotgun style - Yes it's legal but is it a good idea?

    I dont know what the big deal is personally, while its not my type of gun, i can see its a good design from a practical standpoint, especially for possum control.

    Liked On: 01-11-2025, 04:53 PM

13. 
    STC liked post by Old_School On thread : Shotgun style - Yes it's legal but is it a good idea?

    I dont know what the big deal is personally, while its not my type of gun, i can see its a good design from a practical standpoint, especially for possum control.

    Liked On: 01-11-2025, 07:17 AM

14. 
    sharps no 1 liked post by Old_School On thread : Shooting drones in Finland

    Looks like an expensive sport, although these drones can now be built very cheap. Would be a useful skill in Ukraine right now, also would be good for those instances when people spy on your...

    Liked On: 31-10-2025, 07:14 PM

15. 
    flock liked post by Old_School On thread : seating die is pulling out bullets

    Sorry ive confused you, I was not referring to the position of the die being screwed into the press, ive had that backed off quarter a turn and locked up the while time, I was referring to the...

    Liked On: 26-10-2025, 06:56 PM

Page 1 of 9 123456789 Last

• Jump to page: