Puffin
Member

1014 Likes

Page 66 of 68 First ... 165253545556575859606162636465666768 Last

• Jump to page:

1. 
   PERRISCICABA liked post by Puffin On thread : 6.5 Creedmoor

   My 2c worth: 3-shot groups are indicative, and over the eight groups shot + your more recent groups, shows the rifle&shooter general capability - at the top end of what I've read on the Ruger, so it...

   Liked On: 25-01-2016, 11:10 PM

2. 
   veitnamcam liked post by Puffin On thread : 6.5 Creedmoor

   My 2c worth: 3-shot groups are indicative, and over the eight groups shot + your more recent groups, shows the rifle&shooter general capability - at the top end of what I've read on the Ruger, so it...

   Liked On: 25-01-2016, 10:57 PM

3. 
   Skitsokiwi liked post by Puffin On thread : 6.5 Creedmoor

   Satisfying your best expectations I imagine....that is really really good... and with your bullet of choice too. I know little about the Creedmoor other than that 41.5gr of 2209/4350 is reported as...

   Liked On: 10-01-2016, 09:21 AM

4. 
   matto1234 liked post by Puffin On thread : Muzzle brakes, Suppressors, and Accuracy

   I’d like to hear views on how these devices affect our ability to shoot more accurately. Muzzle brakes and suppressors only impact recoil once the bullet has already left the barrel. Setting...

   Liked On: 05-01-2016, 07:08 AM

5. 
   Beaker liked post by Puffin On thread : 338 Lapua

   With respect Jim, and should Brad come down this way, our range standing orders do allow for up to and including .45 for rifles. .338 Lapua & Edge, and .45-70 regularly turn up on the benches.

   Liked On: 17-12-2015, 12:25 PM

6. 
   ebf liked post by Puffin On thread : What would you really like in your collection - if funds were no issue

   Nice choices. I'll also go for a Barnard, Left handed, S or P, with the Jewell, sitting in a McM edge A5 or similar, and chambered in something interesting that can be made from Lapua brass....and...

   Liked On: 16-12-2015, 07:39 AM

7. 
   johnino liked post by Puffin On thread : How long do you age venison before freezing?

   +1 for enzymic action, 2-4 degrees C, typical fridge temperature. 5 degrees is where the problems begin. Usually sits as muscle groups on racks down the bottom of the fridge here, for 2 weeks before...

   Liked On: 21-08-2015, 09:27 AM

8. 
   Danny liked post by Puffin On thread : Leupold VX3

   Great reply, and +1 for the VX3 1.5-5x for a bush rifle, also a favourite here. Limits me to 300m on 5x, and with no turrets on mine a bit of hold-over required at that distance. If you think 300m...

   Liked On: 16-08-2015, 08:47 AM

9. 
   gadgetman liked post by Puffin On thread : Hand loads and suppressors

   A happy coincidence I believe. With respect disagree. Tolerant to changes in charge. It's optimum charge weight for a reason, not OBL. Maybe the underlying theory would hold for a few...

   Liked On: 13-08-2015, 12:25 AM

10. 
    Danny liked post by Puffin On thread : N160 n560 load data for 284 with amax

    With the info supplied QL gives 2760ft/sec for 58.6gr of N560 @ 60k peak PSI, 2638 for 56.1gr of N160 for the same peak pressure. Both are compressed loads, 104% & 107% respectively. The COAL seems...

    Liked On: 07-07-2015, 08:31 AM

11. 
    ebf liked post by Puffin On thread : Correct way to install weaver qr rings on picatinny rail ?

    Except with a brake fitted, then advise going one forward and one back to jam it for acceleration in both directions. My scopes move nett rearward with the T2 fitted if not tight !

    Liked On: 04-05-2015, 07:50 PM

12. 
    199p liked post by Puffin On thread : Leica's Big Riflescope

    Magnus 2.4-16x56 with dual Target Turrets. P/N 54004. There is very little information on-line on this model. Sporting Shooter and NZ Guns & Hunting recently chose to review the 1.5-10x42 as it...

    Liked On: 09-12-2014, 06:20 PM

13. 
    Maca49 liked post by Puffin On thread : household tools

    Any other time- or money-saving ways of using stuff from around the house for reloading or shooting, please post here with pics. 29061 For drying cases after cleaning. 8mm holes in this tray,...

    Liked On: 14-09-2014, 07:38 PM

14. 
    Nick-D liked post by Puffin On thread : household tools

    Any other time- or money-saving ways of using stuff from around the house for reloading or shooting, please post here with pics. 29061 For drying cases after cleaning. 8mm holes in this tray,...

    Liked On: 14-09-2014, 07:09 PM

15. 
    P38 liked post by Puffin On thread : household tools

    Any other time- or money-saving ways of using stuff from around the house for reloading or shooting, please post here with pics. 29061 For drying cases after cleaning. 8mm holes in this tray,...

    Liked On: 14-09-2014, 03:11 PM

Page 66 of 68 First ... 165253545556575859606162636465666768 Last

• Jump to page: