RacksandRods
Member

26 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   RacksandRods liked post by bumblefoot On thread : Stiff deer hide

   RacksandRods The Leders tan kit comes with a tanning lube. Use that prior to breaking. It's really good stuff. I wouldn't stuff about with anything else. Re the thickness, you really need to thin it...

   Liked On: 07-05-2024, 11:52 PM

2. 
   RacksandRods liked post by No.3 On thread : Any Remington 40x about?

   I think PTG does 40x .22 bolt bodies and actions, https://pacifictoolandgauge.com/remington-40x-rimfire-actions/19878-40x-rimfire-single-shot-lonestar.html

   Liked On: 07-05-2024, 11:51 PM

3. 
   RacksandRods liked post by longshot On thread : Any Remington 40x about?

   There is a .308 40x on TM at the moment

   Liked On: 07-05-2024, 11:39 PM

4. 
   RacksandRods liked post by 55six On thread : Any Remington 40x about?

   None sorry We were selling barreled actions for around 1400 I think.

   Liked On: 06-05-2024, 09:05 PM

5. 
   RacksandRods liked post by Ftx325 On thread : Stiff deer hide

   I almost got caught out with the leders kit also. The trick with it is to start the softening process with lube before the skin dries off to much , every day (works for me anyway) I use a 4x2 and...

   Liked On: 06-05-2024, 08:57 PM

6. 
   RacksandRods liked post by Louie On thread : Stiff deer hide

   I'd do what Billbob suggests and sand down until its as thin as paper, then apply the lube/oil

   Liked On: 06-05-2024, 08:57 PM

7. 
   RacksandRods liked post by gonetropo On thread : Stiff deer hide

   sand as necessary and use lanolin hand cream on it.

   Liked On: 06-05-2024, 08:57 PM

8. 
   RacksandRods liked post by Billbob On thread : Stiff deer hide

   Others who have used that tanning system will know better. I would take an orbital sander to it and thin any thick spots and make it uniform as possible and then try more oil and breaking

   Liked On: 06-05-2024, 08:56 PM

9. 
   RacksandRods liked post by Louie On thread : Leder Tanning Instructions

   Thanks mate I've done a few now and have found a cheap water blaster is the best and quickest way to clean them up, if you don't mind snotty sinew flying all over the place

   Liked On: 05-05-2024, 08:57 PM

10. 
    RacksandRods liked post by Southcity On thread : Any Remington 40x about?

    541’s are out there! I have a 541S, 541T HB and a 541T Sporter. Someone will release one at some point!

    Liked On: 04-05-2024, 01:46 PM

11. 
    RacksandRods liked post by Barry the hunter On thread : Any Remington 40x about?

    yes your right Tentman the 541S are classics its what I would try for

    Liked On: 03-05-2024, 07:57 PM

12. 
    RacksandRods liked post by Tentman On thread : Any Remington 40x about?

    I've been interested in the "higher end" Remmy 22s for at least 20 years and I've not seen a 40x based 22 for sale in NZ. The 541s come up occasionally but that's about it as far as I can tell . . ....

    Liked On: 03-05-2024, 07:57 PM

13. 
    RacksandRods liked post by Dicko On thread : Any Remington 40x about?

    The 40x rimfire was made in single shot heavy barrel and magazine fed sporter versions in .22lr. There are a few heavy barrel single shot jobs about but very few of the magazine fed spotters in...

    Liked On: 03-05-2024, 07:57 PM

14. 
    RacksandRods liked post by Kelton On thread : Sitting or Standing…

    Shot one last week bedded and come across 15 odd more that were sitting early roar trip that turned into a week of bush stalking on behalf of quiet stags much easier to shoot standing was my main...

    Liked On: 07-04-2024, 04:32 PM

15. 
    RacksandRods liked post by HNTMAD On thread : Sitting or Standing…

    They do both, have shot 2 while they inbthere beds but mostly standing in the bush Hamish Sent from my SM-S911B using Tapatalk

    Liked On: 07-04-2024, 04:32 PM

Page 1 of 2 12 Last

• Jump to page: