Robojaz
Member

198 Likes

Page 7 of 14 First 1234567891011121314 Last

• Jump to page:

1. 
   Puffin liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   131416

   Liked On: 26-02-2020, 09:15 PM

2. 
   Trigger liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 08:57 PM

3. 
   xtightg liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 08:51 PM

4. 
   2post liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST STAGE CARVE THE PLUG Now having only the one stock for a Savage rifle and no easy way to get a replacement if I destroyed it in the process, I made the decision to make a new rifle stock...

   Liked On: 26-02-2020, 07:54 PM

5. 
   Micky Duck liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 07:40 PM

6. 
   Tommy liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 07:25 PM

7. 
   Rwt liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 07:17 PM

8. 
   dannyb liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 26-02-2020, 07:16 PM

9. 
   Tommy liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   A while back I purchased a second hand Savage Model 110 chambered in 30-06. It was and is a perfectly functional rifle and after a bit of load development manged to get shooting well with a diet of...

   Liked On: 26-02-2020, 07:05 PM

10. 
    Steelisreal liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

    Liked On: 26-02-2020, 07:01 PM

11. 
    Stocky liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    Another long post...

    Liked On: 26-02-2020, 06:28 PM

12. 
    tikka liked post by Robojaz On thread : Ballistics software

    Just looked at Strelok and it also gives you an option for a zero offset

    Liked On: 26-02-2020, 09:51 AM

13. 
    Joe_90 liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 26-02-2020, 09:50 AM

14. 
    ishoot10s liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 26-02-2020, 07:28 AM

15. 
    viper liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 25-02-2020, 09:53 PM

Page 7 of 14 First 1234567891011121314 Last

• Jump to page: