Rimfire rifle silhouette was popular, at least, in Otago in the 80's. Seems to have evaporated since then. It is certainly fun and the target either falls over or it does not. No questions about who...
Liked On: 05-09-2023, 10:42 PM
I have been using a Makita 98202 blade sharpener for some years. The machine is primarily designed to sharpen planer blades (which is why I bought it) but it is flexible. The one I have has a 1000...
Liked On: 28-08-2023, 07:22 PM
Tikka 595 (22 inch barrel), RL22, 139gr Hornady. Most accurate load around 2750ft/sec.
Liked On: 21-08-2023, 04:12 PM
I also have one. For the price they are and their amazing utility, I am surprised that all shooters/reloaders do not have one.
Liked On: 18-08-2023, 09:06 AM
Tikka 595 (22 inch barrel), RL22, 139gr Hornady. Most accurate load around 2750ft/sec.
Liked On: 14-08-2023, 08:43 AM
There are two different factory triggers: single set trigger and standard trigger. Originally, each rifle was supplied with both triggers, one fitted and the other in a little bag with a fitting...
Liked On: 09-08-2023, 09:20 PM
There are two different factory triggers: single set trigger and standard trigger. Originally, each rifle was supplied with both triggers, one fitted and the other in a little bag with a fitting...
Liked On: 09-08-2023, 03:14 PM
Clean out the rust first so that you can see the extent of the pitting.
Liked On: 26-07-2023, 09:31 PM
Clean out the rust first so that you can see the extent of the pitting.
Liked On: 24-07-2023, 01:21 PM
Clean out the rust first so that you can see the extent of the pitting.
Liked On: 24-07-2023, 12:59 PM
Clean out the rust first so that you can see the extent of the pitting.
Liked On: 24-07-2023, 12:33 PM
Free download of this seriously good and out of print book. http://storage.dynamic-arms.com/t-class/books/Rifle%20Accuracy%20Facts%20Full%20v1.1.pdf
Liked On: 22-06-2023, 09:46 AM
Free download of this seriously good and out of print book. http://storage.dynamic-arms.com/t-class/books/Rifle%20Accuracy%20Facts%20Full%20v1.1.pdf
Liked On: 22-06-2023, 08:49 AM
I had a KLX250 revinned about a year ago, after the rego lapsed. It cost a bit over $500 in Christchurch. The bike was in factory condition, without modifications of any sort.
Liked On: 01-05-2023, 10:30 PM
Anneal the neck after sizing. If you anneal before, there is a possibility for the neck to collapse. If you don't anneal afterwards, the necks will crack later. Polish the inside of your resizing die...
Liked On: 26-02-2023, 07:58 PM