rupert
Member

256 Likes

Page 8 of 18 First 123456789101112131415161718 Last

• Jump to page:

1. 
   Micky Duck liked post by rupert On thread : What are you using for pressure estimation in your handloads.

   A method that I have found to be useful for rear locking actions is to measure. the length of the case over a series of firings of an individual case with a chosen load. If the case stretches (and it...

   Liked On: 13-12-2022, 05:21 PM

2. 
   Micky Duck liked post by rupert On thread : 7mm Rem Mag H870 data

   A post from 'Hunting Nut' website quotes Nosler No.5 manual for Nosler 160gr partition and H870: Start load 75.5gr/2982ft/sec Mid load 77.5gr/3047ft/sec Max load 79.5gr/3112ft/sec and Old...

   Liked On: 11-12-2022, 06:05 PM

3. 
   Tedz50 liked post by rupert On thread : 308 accuracy: factory match ammo vs. military ball

   https://rifleshooter.com/2022/11/m24-accuracy-with-m80-ball-ammunition/ A small dose of data, so you know what you might expect.

   Liked On: 27-11-2022, 09:25 PM

4. 
   mudgripz liked post by rupert On thread : 308 accuracy: factory match ammo vs. military ball

   https://rifleshooter.com/2022/11/m24-accuracy-with-m80-ball-ammunition/ A small dose of data, so you know what you might expect.

   Liked On: 27-11-2022, 04:37 PM

5. 
   300CALMAN liked post by rupert On thread : Question: Restoring ( near ) new look to brass

   Wet tumbling with stainless pins will take the tarnish off.

   Liked On: 23-11-2022, 07:32 PM

6. 
   7mmsaum liked post by rupert On thread : Question: Restoring ( near ) new look to brass

   Wet tumbling with stainless pins will take the tarnish off.

   Liked On: 23-11-2022, 10:23 AM

7. 
   Micky Duck liked post by rupert On thread : Combo guns,

   The problem of the rifle barrel bending as it heats up is solved in the Tikka under/over (12ga/222Rem). The rifle barrel on the bottom is a floating design which maintains accuracy after several...

   Liked On: 09-11-2022, 08:15 PM

8. 
   gonetropo liked post by rupert On thread : Looking for Advice on Boots.

   My negative experience. Don't get Asolo: you will find lots of complaints about crumbling mid sole problems. Don't get Lowa: very comfortable straight out of the box, but the rubber they use is...

   Liked On: 22-10-2022, 03:53 PM

9. 
   Moa Hunter liked post by rupert On thread : Binocular cleaning

   Send them back to Zeiss for cleaning via the agent. Don't send without the factory support. I sent a Zeiss scope back for repair and they refused to accept it and it got lost in the post coming back...

   Liked On: 21-10-2022, 12:26 PM

10. 
    Fisherman liked post by rupert On thread : Chronograph thoughts

    If you want consistency from your optical chrono you could build a light box with battery powered lights over the reading slits of the chrono. Atmospheric conditions will no longer be a problem,...

    Liked On: 30-08-2022, 06:10 AM

11. 
    mudgripz liked post by rupert On thread : Interesting rimfire models: your reviews, pics, comments

    re riflemags.co. I bought a Tikka 590 22-250 5 shot mag about four years ago. Process was seamless.

    Liked On: 28-08-2022, 09:36 PM

12. 
    Mooseman liked post by rupert On thread : Chronograph thoughts

    If you want consistency from your optical chrono you could build a light box with battery powered lights over the reading slits of the chrono. Atmospheric conditions will no longer be a problem,...

    Liked On: 24-08-2022, 07:17 PM

13. 
    Puffin liked post by rupert On thread : Chronograph thoughts

    If you want consistency from your optical chrono you could build a light box with battery powered lights over the reading slits of the chrono. Atmospheric conditions will no longer be a problem,...

    Liked On: 24-08-2022, 12:29 AM

14. 
    caberslash liked post by rupert On thread : After market trigger springs

    I've used the larger spring from a BIC lighter. Fitted well in the trigger mechanism and produced a consistent, lighter trigger pull.

    Liked On: 20-08-2022, 02:01 AM

15. 
    csmiffy liked post by rupert On thread : brno barrel

    CZ Hornet barrel will fit. Same thread, profile, etc. But no open sights.

    Liked On: 02-07-2022, 08:54 PM

Page 8 of 18 First 123456789101112131415161718 Last

• Jump to page: