sdogg73
Member

32 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   Ryan_Songhurst liked post by sdogg73 On thread : Sauer Ceratec - experience?

   This is a little different on the sauers. when the bolt rolls over the wrong way the sear ends up in the bolt stop groove on the bolt and can not be remedied without removing the trigger assembly...

   Liked On: 12-05-2022, 10:24 PM

2. 
   Tahr liked post by sdogg73 On thread : Sauer Ceratec - experience?

   This is a little different on the sauers. when the bolt rolls over the wrong way the sear ends up in the bolt stop groove on the bolt and can not be remedied without removing the trigger assembly...

   Liked On: 12-05-2022, 08:21 PM

3. 
   Brakelie liked post by sdogg73 On thread : Hawkes Bay Archers? Peep sight fitting help required

   Theres a guy in havelock north selling archery gear, think he's got a press. search face book for archery hawkes bay or hawkes bay archery, something like that anyway

   Liked On: 17-04-2022, 08:59 PM

4. 
   Micky Duck liked post by sdogg73 On thread : Tikka factory thread

   1/2x20 is fine for tikka 223. Shoot it in the factory stock 1st then swap it in to the carbon just to get a benchmark for accuracy in case the bedding in the carbon stock isn't spot on for the new...

   Liked On: 16-03-2022, 08:33 PM

5. 
   20 Bore liked post by sdogg73 On thread : Tikka factory thread

   1/2x20 is fine for tikka 223. Shoot it in the factory stock 1st then swap it in to the carbon just to get a benchmark for accuracy in case the bedding in the carbon stock isn't spot on for the new...

   Liked On: 16-03-2022, 08:01 AM

6. 
   223nut liked post by sdogg73 On thread : Tikka factory thread

   1/2x20 is fine for tikka 223. Shoot it in the factory stock 1st then swap it in to the carbon just to get a benchmark for accuracy in case the bedding in the carbon stock isn't spot on for the new...

   Liked On: 16-03-2022, 07:51 AM

7. 
   25/08IMP liked post by sdogg73 On thread : Tikka factory thread

   1/2x20 is fine for tikka 223. Shoot it in the factory stock 1st then swap it in to the carbon just to get a benchmark for accuracy in case the bedding in the carbon stock isn't spot on for the new...

   Liked On: 16-03-2022, 07:38 AM

8. 
   dannyb liked post by sdogg73 On thread : Tikka factory thread

   1/2x20 is fine for tikka 223. Shoot it in the factory stock 1st then swap it in to the carbon just to get a benchmark for accuracy in case the bedding in the carbon stock isn't spot on for the new...

   Liked On: 16-03-2022, 07:27 AM

9. 
   Woody liked post by sdogg73 On thread : Sako Ammo

   Have shot the Gamehead Pro in 6.5 creedmore, 6.5x55, .270 win, .308 win, 7mm Rem Mag in various brands of rifle. All shot sub moa and work well on animals. As said, brass is top notch to reload. ...

   Liked On: 20-05-2021, 06:25 PM

10. 
    GWH liked post by sdogg73 On thread : Truing a Ballistic Calculator

    Just double check your data entry. scope height correct,altitude etc? 100 metre zero but shooting in yards, could be giving output for 300 metres not yards. What scope are you using? some dial in...

    Liked On: 02-12-2020, 02:19 PM

11. 
    stagstalker liked post by sdogg73 On thread : Truing a Ballistic Calculator

    Just double check your data entry. scope height correct,altitude etc? 100 metre zero but shooting in yards, could be giving output for 300 metres not yards. What scope are you using? some dial in...

    Liked On: 02-12-2020, 09:28 AM

12. 
    Larskramer liked post by sdogg73 On thread : tikka t3x 300wm cant get to group....

    A couple of other things to check. 1. the front screw for the rail isn't protruding into the bolt lug area of the action.check the others as well, but normally only the front one will give grief ...

    Liked On: 12-05-2020, 09:50 PM

13. 
    northdude liked post by sdogg73 On thread : Steating stem

    Not an uncommon problem with new VLD type projectiles. Can be solved agriculturally by simply drilling the tip area deeper a little, then it'll seat off the ogive not the tip. If you've access to a...

    Liked On: 23-04-2020, 04:09 PM

14. 
    wire hunter liked post by sdogg73 On thread : Advice for new 223

    [QUOTE=wire hunter;991657]wire hunter I have talked to outdoor supplies and they cant help me with the 223 caliber. Waiting to hear back from rivers to ranges. Pretty sure there was 1 on the rack at...

    Liked On: 23-04-2020, 03:02 PM

15. 
    308mate liked post by sdogg73 On thread : Tikka t3 light weight mods

    Considering you're planning on doing this with a standard tikka barrel and the person doing the work doesn't flute deeper or further into the chamber area, no difference to factory fluting. The many...

    Liked On: 22-04-2020, 02:32 PM

Page 1 of 3 123 Last

• Jump to page: