3 generations on this mission, my dad, myself and my two boys. Object was to try and get my boys their first deer. Didn't eventuate unfortunately, deer at awkward angles and lots of fog. Managed 5...
Liked On: 04-12-2022, 12:53 PM
The weather is terrible too couldn't think of a worse place to live to be honest.
Liked On: 04-10-2022, 08:41 PM
Have a look at the pards, delta mike may have them
Liked On: 03-10-2022, 07:58 PM
I think your on the right track. Hunting on the tops with my brother this roar, I was scanning a basin on last light with binoculars with no avail (swaros) my brother pulled out his thermal and...
Liked On: 03-10-2022, 07:58 PM
Hi Shorty,i use a Infiray FH35R,great litttle unit,can range to about 800yds on a good night,batterys last about 3hr.Has built in camera n vid.Picture in Picture.Great unit,detect deer a long way...
Liked On: 03-10-2022, 07:56 PM
Have a good look at the Pard TA62‐35. Very well spec for the money with a higher than usual sensor resolution for its price bracket. Also uses 18650 batteries so super simple to swap out on the run....
Liked On: 03-10-2022, 07:56 PM
I'm literally about shoot/chronograph some 223 Sierra Gameking (RooMax 1365K) in 55gr that I loaded with ADI 2208 - if that's of any interest to you I'm more than happy to share my data.
Liked On: 06-09-2020, 08:52 PM
Plug and play groups. Aim. Pull. Bang. Dead. Sierra in this pill are super accurate.
Liked On: 05-09-2020, 08:27 PM
well obviously at least 600 of them were "minute of deer's vitals"....so they cant be too shabby.
Liked On: 05-09-2020, 08:27 PM
Been a very easy projectile to get a good load with. Got a load with 2206h doing 3k and .5” or less groups at 100 and shot a .5” at 381y the other day from a 20” barrel Sent from my iPhone...
Liked On: 05-09-2020, 08:26 PM
I load Tikka t3x 65Gr SBT ADI brass 26.4Gr 2208 1.90 " comparator [Waterman mag] 2970FPS 148518 148519 And yes, 3 shot groups but two of them one after another.
Liked On: 05-09-2020, 08:22 PM
Cost was around $100. I’ll see if I can find his email and PM to you
Liked On: 09-08-2020, 11:06 PM
I know what you mean, I had a kimber ascent and disliked the stock. I ended up buying a montana stock for it. A much cheaper option would be to use Raptor coating, 2k urathane. Here is a steel 4wd...
Liked On: 09-08-2020, 11:05 PM