SixtyTen
Member

449 Likes

Page 20 of 30 First ... 6789101112131415161718192021222324252627282930 Last

• Jump to page:

1. 
   canross liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   170884 170885 There you go. Recoil pad is installed. 2600g (5.7lbs) at the moment. Im trying to decide how to finish the barrel. The best would be having the barrel hot blued before...

   Liked On: 23-06-2021, 01:38 PM

2. 
   canross liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   I should make it clear im not a lapping expert. I have done a lot of research and reading about the subject, but have lapped less than 10 barrels so far, so take everything I say with a grain of...

   Liked On: 23-06-2021, 01:35 PM

3. 
   rugerman liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   170884 170885 There you go. Recoil pad is installed. 2600g (5.7lbs) at the moment. Im trying to decide how to finish the barrel. The best would be having the barrel hot blued before...

   Liked On: 22-06-2021, 09:45 PM

4. 
   ebf liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   170884 170885 There you go. Recoil pad is installed. 2600g (5.7lbs) at the moment. Im trying to decide how to finish the barrel. The best would be having the barrel hot blued before...

   Liked On: 22-06-2021, 08:00 PM

5. 
   Micky Duck liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   170884 170885 There you go. Recoil pad is installed. 2600g (5.7lbs) at the moment. Im trying to decide how to finish the barrel. The best would be having the barrel hot blued before...

   Liked On: 22-06-2021, 08:00 PM

6. 
   timattalon liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   I have been working on some other projects, but am now back onto this. I needed to thread the muzzle before permanently installing it to the barrel adaptor as I would not be able to hold it in the...

   Liked On: 22-06-2021, 01:41 PM

7. 
   canross liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   I have been working on some other projects, but am now back onto this. I needed to thread the muzzle before permanently installing it to the barrel adaptor as I would not be able to hold it in the...

   Liked On: 22-06-2021, 11:58 AM

8. 
   Moa Hunter liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   Theoretically it should be as the bore does spring open. I don't know how much, but you can feel the difference when sliding a lubricated lead slug in the bore. I don't lap most barrels I work on....

   Liked On: 22-06-2021, 01:14 AM

9. 
   Moa Hunter liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

   I have been working on some other projects, but am now back onto this. I needed to thread the muzzle before permanently installing it to the barrel adaptor as I would not be able to hold it in the...

   Liked On: 22-06-2021, 01:13 AM

10. 
    Puffin liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

    First off, sorry if the images are huge, I am trying to post from my phone and can't work out how to resize them. I have been working on putting a new barrel on this rifle Once I had the old...

    Liked On: 20-06-2021, 11:56 PM

11. 
    Moa Hunter liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

    I managed to cut the extractor for the rim by supergluing it to the barrel and taking gentle cuts. Came out quite nice I think. It doesn't fling the cases at your face like it did when it was a 223,...

    Liked On: 05-06-2021, 08:27 PM

12. 
    Moa Hunter liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

    First off, sorry if the images are huge, I am trying to post from my phone and can't work out how to resize them. I have been working on putting a new barrel on this rifle Once I had the old...

    Liked On: 05-06-2021, 08:23 PM

13. 
    Moa Hunter liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

    So it turns out the barrels are soldered in. I was trying to heat up the barrel shank to break the threads/press fit free and noticed the smell of solder flux and then with a bit more heat, had...

    Liked On: 05-06-2021, 08:13 PM

14. 
    Micky Duck liked post by SixtyTen On thread : Elliot Model 5 tool and cutter grinder

    That makes my little Clarkson T&C grinder look like a toy. Mine only came with a few accessories, and I have been slow at making the stuff im missing, so its of limited use at the moment. Though I...

    Liked On: 05-06-2021, 05:21 PM

15. 
    takbok liked post by SixtyTen On thread : Baikal single shot rebarrel - Anyone done this?

    First off, sorry if the images are huge, I am trying to post from my phone and can't work out how to resize them. I have been working on putting a new barrel on this rifle Once I had the old...

    Liked On: 03-06-2021, 05:30 AM

Page 20 of 30 First ... 6789101112131415161718192021222324252627282930 Last

• Jump to page: