Steelisreal
Member

602 Likes

Page 16 of 41 First ... 23456789101112131415161718192021222324252627282930 ... Last

• Jump to page:

1. 
   flock liked post by Steelisreal On thread : Can twist rate be too fast?

   I agree with TARGEX assertion fully. On Sunday 3 of his 70 grain 6mm bullets shot through a 1/8 twist formed a cluster that was barely more than a bullet diameter wide... The annoying thing about...

   Liked On: 16-08-2022, 02:52 PM

2. 
   25/08 IMP liked post by Steelisreal On thread : First time reloading 270win

   This looks an awful lot like your seating die is set too low in the press. The marks on the case mouth could indicate that it is contacting with the crimping part internally. If your seating die...

   Liked On: 16-08-2022, 10:55 AM

3. 
   Moa Hunter liked post by Steelisreal On thread : First time reloading 270win

   This looks an awful lot like your seating die is set too low in the press. The marks on the case mouth could indicate that it is contacting with the crimping part internally. If your seating die...

   Liked On: 16-08-2022, 10:43 AM

4. 
   grandpamac liked post by Steelisreal On thread : First time reloading 270win

   This looks an awful lot like your seating die is set too low in the press. The marks on the case mouth could indicate that it is contacting with the crimping part internally. If your seating die...

   Liked On: 15-08-2022, 05:57 PM

5. 
   Moa Hunter liked post by Steelisreal On thread : 223 on deer

   I just worked out I don't have pictures of it once modified. The extra 'block' piece in the magazine just needs a couple of slots made for it with a Dremel cutting disc in the middle of the radius at...

   Liked On: 07-08-2022, 01:17 AM

6. 
   small_caliber liked post by Steelisreal On thread : First time reloading 270win

   No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

   Liked On: 06-08-2022, 08:29 PM

7. 
   dannyb liked post by Steelisreal On thread : 308 projectiles, who's using what for hunting?

   And it was delicious too! What about the fallow you shot at 300 and something metres with the 150 Nosler Ballistic Tip from your magical 308? That died the required amount. And it was also...

   Liked On: 05-08-2022, 01:42 AM

8. 
   Micky Duck liked post by Steelisreal On thread : 223 on deer

   I just worked out I don't have pictures of it once modified. The extra 'block' piece in the magazine just needs a couple of slots made for it with a Dremel cutting disc in the middle of the radius at...

   Liked On: 27-07-2022, 06:14 PM

9. 
   dannyb liked post by Steelisreal On thread : 223 on deer

   I just worked out I don't have pictures of it once modified. The extra 'block' piece in the magazine just needs a couple of slots made for it with a Dremel cutting disc in the middle of the radius at...

   Liked On: 27-07-2022, 05:36 PM

10. 
    Mooseman liked post by Steelisreal On thread : Thumbs up for leupold lifetime warranty

    My experience was to email with the nice folks at NZ Asia that I had a similar broken eyepiece. I enquired if I could buy a replacement eyepiece assembly as I had been given these binos and I had no...

    Liked On: 24-07-2022, 07:22 PM

11. 
    Sidetrack liked post by Steelisreal On thread : First time reloading 270win

    No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

    Liked On: 24-07-2022, 11:38 AM

12. 
    Moa Hunter liked post by Steelisreal On thread : First time reloading 270win

    No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

    Liked On: 23-07-2022, 10:10 PM

13. 
    caberslash liked post by Steelisreal On thread : First time reloading 270win

    No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

    Liked On: 23-07-2022, 10:05 PM

14. 
    257weatherby liked post by Steelisreal On thread : First time reloading 270win

    No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

    Liked On: 23-07-2022, 09:08 PM

15. 
    Longrun liked post by Steelisreal On thread : First time reloading 270win

    No, Winchester 760 is not the same as AR2209 - it requires its own data that you can find here: https://www.hodgdonreloading.com/reloading-data-center The various powder 'equivalence' charts...

    Liked On: 23-07-2022, 08:40 PM

Page 16 of 41 First ... 23456789101112131415161718192021222324252627282930 ... Last

• Jump to page: