HBC diagrams in Litz book look pure secant to me, radius is 4.590. Ballistics and performance wise the HBC is a match for the 155 Scenar. There are some gains to be had in heavier projectiles for...
Liked On: 31-10-2014, 07:06 AM
29950 chris w. firing an exact replica of a 1776 flintlock.
Liked On: 30-10-2014, 04:43 PM
Just man up and get a proper weight rifle imo
Liked On: 30-10-2014, 04:12 PM
Hiya, this looks like an interesting place to be. I've been hunting all my life - Dad started us kids on it before we were 5. Grew up in the forestry, so had the bush on our back doorstep for most...
Liked On: 30-10-2014, 02:42 PM
Some AOs will not issue a permit for something which does not require one, which is actually the NZ Police Policy. There is no provision for Police to issue a permit to import for components of...
Liked On: 30-10-2014, 09:19 AM
Original poster is from Turangi. The quarry at TTG isn't a formal range! ;) But ricochets into the still very dry Kaimanawa forest is not a good look.
Liked On: 30-10-2014, 07:37 AM
17HMR might rattle down the barrel a bit and 50 cal might not fit in the chamber but other than that anything between .22 and 338 Lapua should be the go. Ha ha ha ha
Liked On: 30-10-2014, 07:31 AM
Other than a sports shop not really. try reloaders supplies they are fairly popular? Sent from my GT-S5360T using Tapatalk 2
Liked On: 30-10-2014, 07:30 AM
Hi All, This is how I drilled, reamed and cut rifle a barrel in my lathe. My lathe is belt driven and .900" centres ,I made some attachments to fit on the lathe so I could do this, never thinking it...
Liked On: 29-10-2014, 01:46 PM
NF torture test :o Eye-Opening “Must-Watch” Nightforce Optics Torture Test « Daily Bulletin (http://bulletin.accurateshooter.com/2014/10/eye-opening-must-watch-nightforce-optics-torture-test/) ...
Liked On: 29-10-2014, 10:09 AM
I use Federal and Murom, but any will do. Some say Federal are too soft, but I've never had issues, as I always uniform the primer pockets and check seating depth. Good guide to reloading for...
Liked On: 28-10-2014, 03:52 PM
Primer be gone!:D You could superglue a new primer in and good to go:thumbsup::D
Liked On: 27-10-2014, 11:31 AM
Put up a picture of the case please.
Liked On: 27-10-2014, 11:29 AM
55gn or 62gn FMJs should be fine. What ever you can source. But I would just run .223, ie Hornady 50 round packs of 55gn soft points have good brass to keep if you reload, or sell if you don't.
Liked On: 27-10-2014, 11:23 AM
We got wet, but what a great day..... Here's a short video of part of one of the events.... https://www.youtube.com/watch?v=IfdEQMD2tj4 There are also a number of photos on the BRC...
Liked On: 27-10-2014, 10:15 AM