@cmiffy Yep got one in the safe chambered in 30/350 magnum plus an action setup for holland and holland.
Liked On: 18-04-2018, 09:08 PM
I had a M70 featherweight in .270 a 'few' years ago and it was, still is, a top class action designed around less then quality ammo. Today's design's trumpeted as advancements are only cheap, low...
Liked On: 16-04-2018, 11:46 AM
No you need to do half grain with a 223, also just touching means you shouldn't feel any more effort to close the bolt, thats jamming the projectile int o the rifling. make up a dummy round, paint...
Liked On: 08-04-2018, 03:39 PM
No you need to do half grain with a 223, also just touching means you shouldn't feel any more effort to close the bolt, thats jamming the projectile int o the rifling. make up a dummy round, paint...
Liked On: 08-04-2018, 10:20 AM
Just to stir things up some what, you can use skype to sight the license as it is an admissable comunications medium in court.
Liked On: 05-04-2018, 08:15 AM
The rules of engagement haven't changed and arn't likely to. If you have to use your pistol it is shoot to kill. That is the standing orders. Cordite if you wish to take it up with police HQ then all...
Liked On: 04-04-2018, 08:00 PM
You can down load the 454 to 45lc speeds and shoot 300grn lead easy as or load up some 300grn XTPs that will leave the 44mags in the dust. It's a cal I've been looking at.
Liked On: 04-04-2018, 06:56 PM
It will require a serial number on the reciever, which all imported ones have and are recorded or if manufactured here will have to be numbered and recorded by someone with a dealers license,there is...
Liked On: 04-04-2018, 05:50 PM
What happened to tazers, are they no longer used? As we have no actual facts on what happened, maybe any comments by the 'public' should not be published by media till after the inquests.
Liked On: 04-04-2018, 02:28 PM
If you can get some bedding around the recoil lug as well helps alot!
Liked On: 04-04-2018, 04:32 AM
Yes the recoil lugs are stamped out and can have a slight bow in them, look up accurizing the remmington model 7/700.
Liked On: 31-03-2018, 09:51 PM
Here is a suggestion, depending on when a chamber is formed, the first one off the line will have a chamber diameter of .006" more then the one off the line just before new tooling is installed. This...
Liked On: 30-03-2018, 09:51 PM
Here is a suggestion, depending on when a chamber is formed, the first one off the line will have a chamber diameter of .006" more then the one off the line just before new tooling is installed. This...
Liked On: 30-03-2018, 07:48 PM
If you weld the chains on the back of the plate about 40mm down they don't tend to fracture off and the slight downward angle of the face puts the shrapnel down into the ground.
Liked On: 28-03-2018, 09:18 PM
My partner cooks this and I was unsure but she convinced me to try it, now a staple quick meal these days! Still can't stand anchovies by themselves though!
Liked On: 28-03-2018, 11:36 AM