If your goat shooting is max range 150m consider using the likes of Rob Walkers cast HP at $0.40 each over around 12 gn of a Pistol/Shotgun Powder. Red Dot is kind of the standard. I use others...
Liked On: 01-02-2022, 01:39 PM
The Brno rifle will be way better than the 50 year old ammo. Fine to shoot it but a 7x57 that I used for nearly 30 years got more accurate as it got older . . . .actually I think ammo and...
Liked On: 25-01-2022, 07:45 PM
Greetings All, Powder burning speed varies from lot to lot of the same powder. Sometimes this is minor but not always. I almost got caught out by a big change in the speed of AR2209 a few years ago...
Liked On: 25-01-2022, 07:41 PM
120gn Nosler BTs and 50gn 2209 is a load that has worked extremely well across several T3s and a Mod 7. Norma brass. I even used 140gn BT with 50gn 2209 no problem but approach that with usual...
Liked On: 21-01-2022, 08:29 AM
Greetings All, My loads for my 2 .303 rifles are very light and the cases are only neck sized. With loads that develop a pressure of about 35,000 CUP the cases do not stretch at all and you can neck...
Liked On: 18-01-2022, 07:25 AM
I hope Greg doesn't mind re the IP, as its a 2009 edition, so long out of print. 187658 187659 187660 187661
Liked On: 11-01-2022, 02:19 PM
45gr of ar2206h through Tikka 20" gets me 3070 with 120 seira prohunters. Using Winchester brass
Liked On: 11-01-2022, 08:38 AM
My old 20" t3 loved them 120 NBTs, used 45gr 2208 av 2996fps and super accurate
Liked On: 11-01-2022, 08:37 AM
I had to google pin vise but it appears needle drill and pin vise are the same thing. I just use the 0.8mm bit, dont step up in increments. All you're doing is clearing any of the jacket thats...
Liked On: 05-01-2022, 04:29 PM
New ones come in a red box and have the round serrated lock rings. Old ones come in the clear tubes and have the six sided nut lock rings.
Liked On: 04-01-2022, 02:55 PM
Finaly got out to test my loads using 2206h rifle is a Tikka t3x with 20" barrel my coal was 71.7mm Winchester brass fed primers I started at 39 and went to 40.5 in .5 Increments 39= 2703fps with...
Liked On: 28-12-2021, 09:22 AM
Don't go too hard with lead about 50/50 lead to wheel weights and add a little tin to help it flow makes very good bullets for HP' and solid; velocity needs to be 1200fps for solids to expand,...
Liked On: 21-12-2021, 04:26 PM
group No.1 197grn sized .310 group No.2 first shots with 170grn. sized .308 group No.3 170s second shots to get closer to aim mark group No.4 170s moved over to get on the vertical line ...
Liked On: 16-12-2021, 08:33 AM
The plain old Hornady SP (flat base) are easy to get to shot well. And do the job completely fine under 300m.
Liked On: 14-12-2021, 01:50 PM
The problem with the 7mm as a subsonic calibre is the twist rate it won't stabilise bullets longer than my 133 HP and the higher velocity is limited by the twist rate to 1700fps it really is too...
Liked On: 20-08-2021, 05:03 PM