xring
Member

16 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   xring liked post by FRST On thread : Carbon fibre full stock for Winny .270

   73963

   Liked On: 24-06-2021, 08:00 PM

2. 
   xring liked post by nzfubz On thread : Reloading bench

   18mm MDF is your friend, two laminated together is well sturdy enough.

   Liked On: 12-06-2021, 12:17 AM

3. 
   xring liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   A while back I purchased a second hand Savage Model 110 chambered in 30-06. It was and is a perfectly functional rifle and after a bit of load development manged to get shooting well with a diet of...

   Liked On: 07-03-2020, 09:37 PM

4. 
   xring liked post by Wingman On thread : .22TCM Micro Varmint rifle build

   After a boxing day gong shoot with a mate, the last of my 40gr blitzking and Vmax loads were spent so I spent the morning loading up 50 more 40gr Hornady Z-max for the TCM and finally got around to...

   Liked On: 06-01-2019, 01:53 AM

5. 
   xring liked post by Wingman On thread : .22TCM Micro Varmint rifle build

   .22TCM Varmint Rifle build The .22 TCM is a cartridge designed to run out of a 1911 pistol magazine and reaches a scorching 2000fps with a 40gr bullet for the 5” barrel. ...

   Liked On: 21-11-2018, 11:42 AM

6. 
   xring liked post by Wingman On thread : .22TCM Micro Varmint rifle build

   https://preview.ibb.co/bWzuqA/20181108-190438.jpg (https://ibb.co/dSiLVA) I had a quick session with the TCM today and the new Alliant 300MP powder... The powder looks just like H110/Win 296 but...

   Liked On: 12-11-2018, 02:28 PM

7. 
   xring liked post by gundoc On thread : A wee project for myself

   All finished and up to the range to sight in. The 147 grain loads I had scrounged from somewhere were supersonic so no good for evaluating the suppressor, and only mediocre accuracy. I will pull it...

   Liked On: 07-09-2018, 07:16 PM

8. 
   xring liked post by gundoc On thread : A wee project for myself

   Early days but this is just a teaser photo. I have machined the lower from tooling grade aluminium. I will post photos as work progresses. 90208

   Liked On: 07-09-2018, 07:15 PM

9. 
   xring liked post by Wingman On thread : Operation Grendel Tactical Featherweight

   https://preview.ibb.co/cG4OqK/20180809_150801.jpg (https://ibb.co/hXRsje) Well as the title says, I wanted a super lightweight and short carry rifle in a “do it all cal” ….Grendel was high on my...

   Liked On: 07-09-2018, 12:04 AM

10. 
    xring liked post by chrome On thread : Might make one of these

    Mini Cannon Firing at Targets (part #1) - YouTube (http://youtu.be/IxHW-QGMuZ4) Looks like a bit of humour Sent from the swamp

    Liked On: 12-11-2014, 01:54 PM

11. 
    xring liked post by Maca49 On thread : Another stock building attempt

    Ill ask my guy here if hes got one for you

    Liked On: 12-11-2014, 01:47 PM

12. 
    xring liked post by Spanners On thread : Bullets I make

    DLM wire is a small fortune. I had extrusion dies made in Canada and make my own. https://www.youtube.com/watch?v=gJX0eikISnc

    Liked On: 28-10-2014, 11:40 PM

13. 
    xring liked post by Uplandstalker On thread : New 223

    Been shooting this a bit lately, mainly hares and wallabies with the 60gr Partition. Going well and have now got the 15 fires from a couple of the cases. These still look good and are only getting...

    Liked On: 13-10-2014, 11:23 PM

14. 
    xring liked post by Uplandstalker On thread : New 223

    Being the Internet I know I’ll get the normal question and comments; “why not a 223AI, 22-250, 22-250AI etc”, but I figured it was more about me trying to learn a bit about this reloading. Like a...

    Liked On: 13-10-2014, 11:22 PM

15. 
    xring liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi All, This is how I drilled, reamed and cut rifle a barrel in my lathe. My lathe is belt driven and .900" centres ,I made some attachments to fit on the lathe so I could do this, never thinking it...

    Liked On: 30-09-2014, 11:39 AM

Page 1 of 2 12 Last

• Jump to page: