If it were me I would be reluctant to buy an older glass hull. Up until the 90's the transoms in most glass boats contained significant amounts of wood and the stringers in the hull were also wooden....
Liked On: 12-02-2023, 12:15 PM
If it were me I would be reluctant to buy an older glass hull. Up until the 90's the transoms in most glass boats contained significant amounts of wood and the stringers in the hull were also wooden....
Liked On: 12-02-2023, 10:37 AM
If it were me I would be reluctant to buy an older glass hull. Up until the 90's the transoms in most glass boats contained significant amounts of wood and the stringers in the hull were also wooden....
Liked On: 12-02-2023, 10:27 AM
If it were me I would be reluctant to buy an older glass hull. Up until the 90's the transoms in most glass boats contained significant amounts of wood and the stringers in the hull were also wooden....
Liked On: 12-02-2023, 09:28 AM
I first became aware of Peter Harker when stuck in hut for a day due to shit weather there was a pile of old 70's hunting magazines. His stories really stood out as amusing and hardcore. Backsteak...
Liked On: 18-12-2022, 07:24 PM
I looked into building a jet-ski based 3M a few years ago and instead built a 3.6 with conventional running gear (2L car engine and 7.5 inch single stage) and I'm glad I did. I've travelled in a...
Liked On: 28-03-2022, 08:36 AM
I looked into building a jet-ski based 3M a few years ago and instead built a 3.6 with conventional running gear (2L car engine and 7.5 inch single stage) and I'm glad I did. I've travelled in a...
Liked On: 28-03-2022, 07:50 AM
you can fall in the pond, grovel out, shake the water out and keep shooting with the M2 as it's recoil operated, the 1301 is gas operated so a bit more fiddly to clean and won't cope with a full...
Liked On: 22-02-2022, 09:03 AM
you can fall in the pond, grovel out, shake the water out and keep shooting with the M2 as it's recoil operated, the 1301 is gas operated so a bit more fiddly to clean and won't cope with a full...
Liked On: 11-02-2022, 03:03 PM
I got frustrated with variable quality from butchers over the years. Have you thought about having a crack yourself? practice on some trout first. Get one of these...
Liked On: 30-01-2022, 09:37 PM
https://www.trademe.co.nz/a/motors/cars/morris/minor/listing/3401799219?bof=5jmETMXU
Liked On: 12-01-2022, 07:09 PM
And I thought the recent price hikes for old jap trucks in NZ seemed insane..... https://www.trademe.co.nz/a/motors/cars/land-rover/defender/listing/3367263806?bof=IRxuuuoo
Liked On: 11-12-2021, 10:48 AM
I would only use neck turner on ammo for rifle with factory chamber if chasing serious accuracy using dies with neck bushings and cheap brass with poor neck thickness uniformity. If you neck turn...
Liked On: 21-09-2021, 09:49 PM
+1 as beetroot says crf230 or ttr230 you would need to spend at least 3k to get a decent one. Trying to double someone especially with gear as well would be a shit show
Liked On: 07-09-2021, 02:53 PM
Are you sure it's not a measurement issue? If you mark a vertical line on case shoulders with a sharpie and also mark the shoulder insert thingy as well. Measure a case with the marks lined up then...
Liked On: 04-09-2021, 10:23 PM