zimmer
Member

2535 Likes

Page 65 of 169 First ... 155152535455565758596061626364656667686970717273747576777879115165 ... Last

• Jump to page:

1. 
   BSA270 liked post by zimmer On thread : OAL - gauge and comparator

   There's always a slight difference for projectiles oal. Lead tipped are the worst followed by hollow point. Plastic tips less so. As you are doing Base to Ogive that is the correct and only way to...

   Liked On: 01-11-2021, 10:06 PM

2. 
   Micky Duck liked post by zimmer On thread : Ruger Ranch II Bolt face - do I have a problem?

   Photos are not great but there doesn't appear to be pressure sighs. A check of the primer pocket for excess expansion will tell you more in that area. Most likely as other have said, a faulty...

   Liked On: 01-11-2021, 09:08 PM

3. 
   XR500 liked post by zimmer On thread : Around taupo- bulk eley match ammo 22lr

   The brand and the name of the line are a bit of a give away...... I presume this is coming from Shooting Stuff? I buy all my RF ammo off them. I see they are also selling mixed lots of 5000 Eley...

   Liked On: 01-11-2021, 07:40 PM

4. 
   Jhon liked post by zimmer On thread : Ruger Ranch II Bolt face - do I have a problem?

   Photos are not great but there doesn't appear to be pressure sighs. A check of the primer pocket for excess expansion will tell you more in that area. Most likely as other have said, a faulty...

   Liked On: 01-11-2021, 04:13 PM

5. 
   Longranger liked post by zimmer On thread : Ruger Ranch II Bolt face - do I have a problem?

   Photos are not great but there doesn't appear to be pressure sighs. A check of the primer pocket for excess expansion will tell you more in that area. Most likely as other have said, a faulty...

   Liked On: 01-11-2021, 02:26 PM

6. 
   caberslash liked post by zimmer On thread : Lee Collet Neck Dies - New "feature"

   And how do you determine 25-30 lbs of force? Got a gauge (make that a gage) on the press handle, torque wrench in place of the handle? I just went ahead and ignored their instruction to not cam...

   Liked On: 29-10-2021, 03:06 AM

7. 
   ebf liked post by zimmer On thread : Lee Collet Neck Dies - New "feature"

   And how do you determine 25-30 lbs of force? Got a gauge (make that a gage) on the press handle, torque wrench in place of the handle? I just went ahead and ignored their instruction to not cam...

   Liked On: 28-10-2021, 08:16 PM

8. 
   ebf liked post by zimmer On thread : Lee Collet Neck Dies - New "feature"

   I'd dispute the 95%. A lot of competition shooters use and swear by Lee Collet dies. (Lee used to even publish the collet die as at one stage holding a 1000 yd record.) They don't want the step in...

   Liked On: 27-10-2021, 01:14 PM

9. 
   Jhon liked post by zimmer On thread : Lee Zip Trim- do you rate It?

   I have one. I wouldn't have specifically bought it locally but I threw it into an order from Titan in the States just to pad the order out a bit. It works OK in fact very well. Flimsy and plasticy...

   Liked On: 26-10-2021, 11:10 AM

10. 
    Ranger 888 liked post by zimmer On thread : Is an air rifle a firearm?

    Whether or not the rifles shown in the picture are legally firearms or not is irrelevant. For the purposes of the statistics presented to the public on how many illegal "firearms" are on the loose...

    Liked On: 24-10-2021, 05:26 AM

11. 
    viper liked post by zimmer On thread : CZ 455 Trigger job

    +1 YoDave kit. Have done 2 for a mate and 1 for myself. Didn't do anything for crispness which was pretty good already. IIRC the spring I used halved the weight and was still very safe. If...

    Liked On: 23-10-2021, 08:43 PM

12. 
    Steelisreal liked post by zimmer On thread : Starline brass....any good ?

    Last 2 boxes of Lapua I bought also had one extra. (Is soneone else receiving 99?) Great if you have an AMP annealer and need to sacrifice a case to determine the Aztec setting.

    Liked On: 20-10-2021, 01:47 PM

13. 
    keengunNic liked post by zimmer On thread : Starline brass....any good ?

    Last 2 boxes of Lapua I bought also had one extra. (Is soneone else receiving 99?) Great if you have an AMP annealer and need to sacrifice a case to determine the Aztec setting.

    Liked On: 20-10-2021, 11:46 AM

14. 
    caberslash liked post by zimmer On thread : Some Lee Enfield History

    Might as well add in the BREN and the lesser known BESA machine guns.

    Liked On: 18-10-2021, 07:05 PM

15. 
    BSA270 liked post by zimmer On thread : NZFS and CAC

    There was mention of the Dip Flat NZFS training camp in the other thread. Was this booklet issued as part of that traing? 181114 181115

    Liked On: 17-10-2021, 08:46 PM

Page 65 of 169 First ... 155152535455565758596061626364656667686970717273747576777879115165 ... Last

• Jump to page: