Have just bought a set of comparators so i’ll be able to compare the distance off the lands between my loads and the factory ammunition
Liked On: 03-11-2020, 09:50 AM
forget electrical tape, self amalgamating rubber tape is the way to go
Liked On: 01-11-2020, 05:23 PM
Greetings All, Perhaps no one died using loads from the intrepid years but some lost eyes, parts of their face and hands. Reloading manuals prior to about 1975 were mostly worked up using...
Liked On: 01-11-2020, 08:01 AM
Well that took longer than I hoped.. got a couple of usable loads. The Berger Hybrid Tactical bullets seemed to want to be on the lands or the groups were plagued with flyers. Finished up with...
Liked On: 30-10-2020, 03:09 PM
100 yrds will work just fine.
Liked On: 30-10-2020, 12:32 PM
Can run up to 2900fps with the 130gr class and RL16 in a 24" Trueflite. Backing them off to about 2750- 2800 tomorrow to test a lower node with 2208. Had a brain fart this morning and used my 123gr...
Liked On: 29-10-2020, 08:10 PM
Spend the morning working up some new match loads with some new bullets for the desert tech bullpup in 6.5x47 Lapua. I have only been using the barrel for hunting but decided to get back into a bit...
Liked On: 29-10-2020, 07:48 PM
Fit is everything for target shooting, 3P etc and women different body shapes, shorter LOP / arms and stature generally. You want her to try a few different makes i reckon and let that drive the...
Liked On: 29-10-2020, 08:32 AM
Are they spread relatively evenly, or in two clusters? Two clusters would suggest a bedding issue to me.
Liked On: 28-10-2020, 05:47 PM
Try bedding again. Just because it is bedded doesn’t mean it’s bedded well. Looks can be deceiving.
Liked On: 28-10-2020, 05:47 PM
Any one wanting a holiday staying in a bus near Thompson's Track?...bus was used during lockdown as a 'bubble', since lockdown has sat empty...has long drop toilet, solar panels running fridge and...
Liked On: 24-10-2020, 08:21 PM
I had issues with the Peterson brass compared to lapua srp brass. Case capacity significantly less wasn’t able to get similar velocity without pressure.
Liked On: 21-10-2020, 07:46 PM
I used to run a Tikka CTR on SRP in 6.5 Creedmoor Lapua brass ( not Peterson ) never had an issue with CCI450 primers but did get erratic ignition and hang fires on other primers. Still running...
Liked On: 16-10-2020, 12:17 PM
I need heaps, haven’t been out yet!!
Liked On: 13-10-2020, 08:10 PM
It’s very very annoying. ATK / Vista Outdoors acquired the Weaver brand and ran it in the same stable as Bushnell, Tasco, Millet, Simmons. Unfortunately there was a decision sometime back to brand...
Liked On: 11-10-2020, 01:13 PM