zimmer
Member

1490 Likes

Page 72 of 100 First ... 225859606162636465666768697071727374757677787980818283848586 ... Last

• Jump to page:

1. 
   zimmer liked post by gundoc On thread : Any Whitworth shooters ?

   It came out of Trentham Base Ordnance Depot in the 1960's when they disposed of the few they still had in the stores. I got it from the late Robbie Tiffen a few years ago.

   Liked On: 10-10-2020, 10:26 PM

2. 
   zimmer liked post by gundoc On thread : Any Whitworth shooters ?

   Some pictures of my Whitworth (circa 1863). 150990 150991 150992

   Liked On: 09-10-2020, 07:52 PM

3. 
   zimmer liked post by andyanimal31 On thread : Barrels ruined by cleaning

   A good mate of mine who is a qualified chemical engineer looked at me sideways and suggested it's not the most brilliant thing to do as it reacts with steel. When I read about it I was keen as to...

   Liked On: 08-10-2020, 03:18 PM

4. 
   zimmer liked post by Micky Duck On thread : Fertilizer dust in my eyes

   My good wife took our wee brown buddy for last drive today. he is now sleeping peacefully under our bedroom window with a hare to chew on during his journey to the big duckpond in the sky. 2010 was...

   Liked On: 07-10-2020, 08:58 AM

5. 
   zimmer liked post by dannyb On thread : Trying something, Eric Cortina method of load development

   Just a quick update, this is all on hold whilst I sort out a few things, I have sold my Lyman powder dispenser and will be replacing it with a RCBS chargemaster lite. I have had a change of heart on...

   Liked On: 06-10-2020, 06:02 PM

6. 
   zimmer liked post by Dead is better On thread : Trying something, Eric Cortina method of load development

   Ironically he's just swapped one "moving target" for another. Because what is 'jam'? One case with its own neck tension and runout will never leave the bullet in the exact location as any other case...

   Liked On: 06-10-2020, 03:30 PM

7. 
   zimmer liked post by gqhoon On thread : Magnetodspeed "sporter" suppressor mod

   If you're not keen on altering the bayonet, adding a couple of neodymium magnets seems to increase the magnetic fields enough that it picks up the projectile passing through. Tried it yesterday and...

   Liked On: 05-10-2020, 08:23 AM

8. 
   zimmer liked post by dannyb On thread : Trying something, Eric Cortina method of load development

   Quite right, even when testing charge weights in the future I will make sure that I am at least on paper, this rifle and scope are new to me and maybe I should have put a bit more time and effort...

   Liked On: 01-10-2020, 06:19 PM

9. 
   zimmer liked post by veitnamcam On thread : Trying something, Eric Cortina method of load development

   Seating depth or jump/jam is important and important to be consistent but I really dont see how he is doing anything different than we have all been doing for years by measuring from "jam" than...

   Liked On: 30-09-2020, 09:01 PM

10. 
    zimmer liked post by Tahr On thread : Load Data for Belmont Powder

    Old thread on this topic. https://www.nzhuntingandshooting.co.nz/f10/belmont-rifle-powder-763-a-60367/

    Liked On: 30-09-2020, 08:06 AM

11. 
    zimmer liked post by Micky Duck On thread : Rifling a Cannon barrel in NZ ?

    there are quite a few boffors barrels sitting around the show.... could you maybe make your cannon around one of them???

    Liked On: 29-09-2020, 03:03 PM

12. 
    zimmer liked post by Tentman On thread : DYI Anschutz Magazine

    Next weekend I have a match that requires a 10 shot magazine. None to be had for an Annie with the 64 action (a 1416 in my case). The interweb (particularly Rimfire Central - the go-to place for...

    Liked On: 26-09-2020, 09:03 PM

13. 
    zimmer liked post by Micky Duck On thread : Calculating pressures in hand loads

    primers ARENT irrelevant.....BUT they can be misleading if you dont know what your looking for....MOST older manuals have photos to show a fella what looks too hot...yes different primers react...

    Liked On: 25-09-2020, 08:47 AM

14. 
    zimmer liked post by Bagheera On thread : Try NRA Shooting Canterbury

    I had the same thing. Edited once but got a white dialog box on second attempt, hence a few typos left in .

    Liked On: 22-09-2020, 11:48 PM

15. 
    zimmer liked post by johnd On thread : Try NRA Shooting Canterbury

    We run the solo's at Te Puke as well, they are a step up from the older versions and where you used to get variance target to target they all seem to read very similar, but as said the velocity...

    Liked On: 22-09-2020, 09:24 PM

Page 72 of 100 First ... 225859606162636465666768697071727374757677787980818283848586 ... Last

• Jump to page: