Thread: 308 win 135smk

Originally Posted by rambo-6mmrem

Yes
135gn smk
Pmc brass
Cci br2
Ar2208
Loaded 5 loads
Of
47
47.5
48
48.5 (full case within 3mm of the top

The lee seating die fully screwed in
Run out of adjustment
Even screwed the die body in till it was touching shell holder to get the extra 20thou
Still just off the lans closer than what I would like but absolutely no more adjustments in the die
Only about 2-3mm of bullet inside the case not counting the boat tail

But they go ok
We will just run 47gn 2208 as that was probably most accurate little bit hard to tell as he pulled a few shots
Says it kicks less than his Sks now so successfully got the recoil down which was the main objective once he re gains confidence in the rifle now it doesn’t hurt his shooting should get better then we can play to try and get more out of it

Sure you are using a 308 seating die?