If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Your firing pin is skinnier than the hole it pokes out of in the bolt. The primer will extrude back and into the gap between the two, hense the little ring around the strike mark in the primer. Nothing unusual.
Those primers look very round. I would draw no conclusion of excessive pressure on those.
Youre using the 70g or 95 Targex? What powder? 2209? ADI has 42g for 95g as max
theres a smear on the base of the case from camming the bolt over. I think you need to FL size your brass first. Does an empty case chamber and eject easily? When you say bumping do you mean extra force to chamber the round? Tight bolt?
You really should learn how to find your lands first and work back from there rather than guess. Its pretty easy. Whats the rifle?
accuracy is king. Forget speed.
Ah OK.
95 grain targex.
H414. The book max off hodgon website is 42.0 as well. The 43.0 grains was from an old 1992 book.
I have only neck sized with a collet die.
Never tried.
Yes. And yes
Howa 1500. I just used max cartridge overall length.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks