Thread: Grouping

just spotted CAC brass......check them out for consistancy....they being very old,back then consistantcy WASNT the norm,as much as it is now.

that old brass must as old if not older then Micky Duck. anneal it or throw it away start from the bottom get some brass that you know has only been fired 1 or 2 times check the scope is set up properly? could be the scope I had a similar problem scope internal adjustments had clagged out and I went through the same shit as is happening to you drove me nuts almost gave up shooting so if you can,t figure it out get someone to help figure it out.

My bet is something loose
Rings/bases possibly action screws
Or maybe a cheaper scope that’s fucked out and is moveing on you under recoil

Yer deffo not the scope or rings I have checked it all the scope is only a year and a half old a Zeiss v6 on teir one rings. CAC brass I was given 100 or so all trimed and cleaned ready to go. But might change it but seems a waste.

agree,would be a waste........as said before....how big is overall group???? still good bush range load,which I assume you aiming at with 130grns mono....

If you've had it out of the stock check to make sure you have got it back on the lug properly as seen that a few times.
Next bet is loose rail screws.
If neither of those it has only left scope and ammo to eliminate.

Sent from my SM-G950F using Tapatalk