Thread: Reloading bench

Originally Posted by Max Headroom

One thing I have found is that my Lyman Gen 6 does not appreciate being shaken, which is bound to happen with the action of using a press.

I don't know what you use to dispense and weigh powder, but I suggest you have a place near your press that is separate and unaffected by vibration.

Either that or build a bench really solidly. ( I use a tv stand on castors beside the bench )

I value bench space for sorting stuff and cutting down on clutter. Build the largest one you possibly can.

That's a bloody good point, I think I'll put a small dividing gap (3-4mm) on the part of the bench with the scales. I've got Chargemaster and A&D scales, so definitely don't want any shaking.