Advice on securing a Oceania Defence Muzzle Brake onto a thread

[308mate]

Hey guys I Have a 5/8x24 cyclone muzzle brake/flash hider Oceania Defence which I use with my Oceania Defence Suppressor on my 3030 Marlin Dark.

I was blasting away on the weekend and noticed that the brake had come loose with the suppressor attached. These brakes are not timed on so I was thinking of putting some kind of loc tite on it or maybe trying to put a crush washer on it. Any suggestions?

Just don't want a baffle strike on my ODL can.

[308mate]

[ebf]

Phone ODL direct 07-262-0044

[eamars]

Did you hand tight the muzzle break or with any torque tool?

[308mate]

Did you hand tight the muzzle break or with any torque tool?

Spanner mate

[eamars]

I ring them on Friday regarding this question. They suggest to use crush washer and torque to somewhere you cannot unscrew by hands...

[308mate]

I ring them on Friday regarding this question. They suggest to use crush washer and torque to somewhere you cannot unscrew by hands...

Thanks mate think I will try this tomorrow

[300CALMAN]

crush washer or conical spring washer

[seano]

crush washer

+1

Sent from my SM-G930U using Tapatalk

[300CALMAN]

+1

Sent from my SM-G930U using Tapatalk

i used a conical spring washer on my 300 AAC suppressor as you can tighten by hand and still remove

[eamars]

Mine arrived today. I received the 2 port compensator instead of the muzzle brake because they ran out of the stock recently. The manual says you could use shim and optionally red loctite if needed. I've heard people saying using crush washer with suppressor is bad so I went to shims and loctite option straightaway.

[northdude]

Just use thread retainer it should keep it tight but still be able to undo it if you want to

[northdude]

Call into work and you can use some of ours to save you buying a bottle of it

[308mate]

Mine arrived today. I received the 2 port compensator instead of the muzzle brake because they ran out of the stock recently. The manual says you could use shim and optionally red loctite if needed. I've heard people saying using crush washer with suppressor is bad so I went to shims and loctite option straightaway.

Quite interested to know how bad the noise and blast on this is without the suppressor. I considered the two port but was put off it by a few guys on here. I still like the idea of it though.

[eamars]

Quite interested to know how bad the noise and blast on this is without the suppressor. I considered the two port but was put off it by a few guys on here. I still like the idea of it though.

Yeah you will get decent noise with such short barrel.

By the way, I wonder do you have comment on the accuracy of your rifle? I got horrible grouping (>3') at 100yards with suppressor on, and Horndy leverevolution 160gr ammo.