Thread: M20P problem

Ok, so I pulled my trusty Stirling apart for a coat of paint, which went very well. EXCEPT. When taking the safety latch off my thumb was a little bit too far back, which allowed the safety latch bearing to achieve low orbit, probably never to be seen again. So what I'm after is either:

-If someone has one handy, if they are brave enough to pull theirs off and measure the diameter of the bearing so I can get another one, or

-If someone has an inoperable rifle I can buy the bearing out of.

Any help would be appreciated, even somewhere in Hamilton that would sell me one approx. 3mm bearing.