Thread: Brake Pull

Hi all. I need to little help. My ute failed a wof for pulling to the right when braking. So far I've removed, cleaned, regreased the caliper slider pins. Checked for stuck piston, thats algood. Replaced both pads. gave the system a good bleed. Checked the brake hose for leaks or collapse, seems fine but I might swap the two front hoses around to see if theres any change before I spend money on a new hose. Put on another set of rims and tyres, no change. The left rotor way have a slight warp? I ran a test by jacking up the front, applying a small amount of brake pressure, just enough to be able to still rotate the front wheels with a needle style torque wrench to see how much pressure each brake was producing. Right hand brake was 60 ft-lb, left was 44. Thats a considerable amount, question is, WHY?